2000 Toyota Tundra Access Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Toyota Tundra Access Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 15 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2000 Tundra Access Cab — Year-Specific Fitment Context
The 2000 model year marks the beginning of the Toyota Tundra Access Cab's 6x139.7 bolt pattern era, which continued through 2006 (7 consecutive years). Wheels from any 2000–2006 Toyota Tundra Access Cab are cross-compatible with the 2000 model.
Toyota Tundra Access Cab Bolt Pattern by Year
The table below shows how the Tundra Access Cab's wheel specifications have changed over the years. The 2000 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2000 Toyota Tundra Access Cab
For your 2000 Toyota Tundra Access Cab, the bolt pattern is 6x139.7mm with a center bore of 106.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The offset is sensitive; stock offset is 15mm. Deviating more than ±10mm may cause rubbing or clearance issues. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles. Wheels from 2000-2006 Tundra Access Cab are direct fit.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Access Cab appears from 2000 to 2006 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 5mm or above 25mm to prevent rubbing on suspension or body.
- ✅ Always verify center bore; if aftermarket wheels have a larger bore, use 106.1mm hub-centric rings.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Toyota Tundra Access Cab — Frequently Asked Questions
What is the bolt pattern for a 2000 Toyota Tundra Access Cab?
The 2000 Toyota Tundra Access Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 15mm.
What other years of Toyota Tundra Access Cab have the same bolt pattern as the 2000?
The Toyota Tundra Access Cab uses the 6x139.7 pattern from 2000 through 2006. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Do 2000 Toyota Tundra Access Cabs use lug bolts or lug nuts?
The 2000 Tundra Access Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2000 Toyota Tundra Access Cab?
The OEM offset for the 2000 Tundra Access Cab is typically around 15mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 15mm offset mean for the 2000 Tundra Access Cab?
An offset of 15mm means the wheel's mounting surface is 15mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Can I use spacers on my 2000 Toyota Tundra Access Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset