2006 Toyota Tundra Access Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Toyota Tundra Access Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 15 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2006 Tundra Access Cab — Year-Specific Fitment Context
The 2006 model year is the final year of the Toyota Tundra Access Cab's 6x139.7 bolt pattern run (since 2000). Wheels from any 2000–2006 Toyota Tundra Access Cab are cross-compatible with the 2006 model.
Toyota Tundra Access Cab Bolt Pattern by Year
The table below shows how the Tundra Access Cab's wheel specifications have changed over the years. The 2006 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2006 Toyota Tundra Access Cab
For your 2006 Toyota Tundra Access Cab, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. The offset is sensitive: stock is around 15mm; deviations affect scrub radius and steering feel. Always use the correct 12x1.5 lug nuts with a 60-degree conical seat (common for Toyota). Avoid ball-seat or shank-style nuts. Torque to 83 ft-lbs in a star pattern, and re-torque after 50 miles. This final year of the 6x139.7 pattern means wheels from 2000-2006 Tundra Access Cab are direct fit.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Access Cab appears from 2000 to 2006 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset outside 0-30mm; extreme offsets may cause rubbing or bearing wear.
- ✅ Verify wheel bore diameter; if larger than 106.1mm, use hub-centric rings to prevent vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Toyota Tundra Access Cab — Frequently Asked Questions
What is the bolt pattern for a 2006 Toyota Tundra Access Cab?
The 2006 Toyota Tundra Access Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 15mm.
What other years of Toyota Tundra Access Cab have the same bolt pattern as the 2006?
The Toyota Tundra Access Cab uses the 6x139.7 pattern from 2000 through 2006. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2006 Toyota Tundra Access Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 15mm, and a center bore of at least 106.1mm (using hub rings if larger).
What lug nut size does the 2006 Toyota Tundra Access Cab use?
The 2006 Toyota Tundra Access Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2006 Toyota Tundra Access Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the PCD for a 2006 Toyota Tundra Access Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 Tundra Access Cab, the PCD is 6x139.7.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset