2014 Toyota Venza Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Toyota Venza, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Venza — Year-Specific Fitment Context
The 2014 Toyota Venza is in year 6 of 16 using the 5x114.3 pattern (2009–2024). Wheels from any 2009–2024 Toyota Venza are cross-compatible with the 2014 model.
Toyota Venza Bolt Pattern by Year
The table below shows how the Venza's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 5x114.3 | 60.1 | 35-45 |
| 2010 | 5x114.3 | 60.1 | 35-45 |
| 2011 | 5x114.3 | 60.1 | 35-45 |
| 2012 | 5x114.3 | 60.1 | 35-45 |
| 2013 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2014 | 5x114.3 | 60.1 | 35-45 |
| 2015 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Toyota Venza
When selecting aftermarket wheels for your 2014 Toyota Venza, the center bore of 60.1mm is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is tight: 35-45mm. Sticking to this range avoids rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat; aftermarket wheels may require ball or conical seats. Mismatched lug nuts can cause wheel loosening. For safety, verify lug nut compatibility and torque to spec.
Historical Fitment Data Reference
In our dataset, Toyota Venza appears from 2009 to 2024 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fitment wheels without hub-centric rings; vibrations and stress on studs can occur.
- ✅ Check inner clearance for brake calipers; some aftermarket wheels may require spacers or caliper grinding.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Toyota Venza — Frequently Asked Questions
What is the bolt pattern for a 2014 Toyota Venza?
The 2014 Toyota Venza uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Venza have the same bolt pattern as the 2014?
The Toyota Venza uses the 5x114.3 pattern from 2009 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2014 Toyota?
The 2014 Venza uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2014 Toyota Venza?
The factory center bore (hub bore) for the 2014 Toyota Venza is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2014 Toyota Venzas use lug bolts or lug nuts?
The 2014 Venza requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2014 Toyota Venza use?
The 2014 Toyota Venza uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset