2022 Toyota Venza Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Toyota Venza, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 Venza — Year-Specific Fitment Context
The 2022 Toyota Venza is in year 14 of 16 using the 5x114.3 pattern (2009–2024). Wheels from any 2009–2024 Toyota Venza are cross-compatible with the 2022 model.
Toyota Venza Bolt Pattern by Year
The table below shows how the Venza's wheel specifications have changed over the years. The 2022 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 5x114.3 | 60.1 | 35-45 |
| 2010 | 5x114.3 | 60.1 | 35-45 |
| 2011 | 5x114.3 | 60.1 | 35-45 |
| 2012 | 5x114.3 | 60.1 | 35-45 |
| 2013 | 5x114.3 | 60.1 | 35-45 |
| 2014 | 5x114.3 | 60.1 | 35-45 |
| 2015 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Toyota Venza
For your 2022 Toyota Venza, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure load is on the hub, not the lugs. Offset must stay within 35-45mm; deviating can cause rubbing or poor handling. Always use lug nuts with the correct 12x1.5 thread pitch and proper seat type (conical or ball seat) matching the wheel. Mismatched lug nuts can lead to wheel loss. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Toyota Venza appears from 2009 to 2024 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 60.1mm bore is specific to Toyota.
- ✅ Check for caliper clearance when using wheels with offset near 35mm, as the Venza has large brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Toyota Venza — Frequently Asked Questions
What is the bolt pattern for a 2022 Toyota Venza?
The 2022 Toyota Venza uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Venza have the same bolt pattern as the 2022?
The Toyota Venza uses the 5x114.3 pattern from 2009 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
Do 2022 Toyota Venzas use lug bolts or lug nuts?
The 2022 Venza requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2022 Toyota?
The 2022 Venza uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2022 Toyota Venza?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
What is the PCD for a 2022 Toyota Venza?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 Venza, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset