2009 Toyota Venza Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Toyota Venza, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2009 Venza — Year-Specific Fitment Context
The 2009 model year marks the beginning of the Toyota Venza's 5x114.3 bolt pattern era, which continued through 2024 (16 consecutive years). Wheels from any 2009–2024 Toyota Venza are cross-compatible with the 2009 model.
Toyota Venza Bolt Pattern by Year
The table below shows how the Venza's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2009 | 5x114.3 | 60.1 | 35-45 |
| 2010 | 5x114.3 | 60.1 | 35-45 |
| 2011 | 5x114.3 | 60.1 | 35-45 |
| 2012 | 5x114.3 | 60.1 | 35-45 |
| 2013 | 5x114.3 | 60.1 | 35-45 |
| 2014 | 5x114.3 | 60.1 | 35-45 |
| 2015 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2009 Toyota Venza
For your 2009 Toyota Venza, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 35-45mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct 12x1.5 thread pitch and a 60-degree conical seat (common for Toyota). Ball-seat or incorrect thread pitch can cause wheel loosening. Verify lug nut engagement—at least 6-8 full turns—and torque to 76 ft-lbs. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Venza appears from 2009 to 2024 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid wheels with offset below 35mm (too aggressive) or above 45mm (too tucked), as they may cause rubbing or clearance issues.
- ✅ If using aftermarket wheels, always install hub-centric rings (60.1mm ID to wheel's bore OD) to prevent vibrations and ensure centering.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Toyota Venza — Frequently Asked Questions
What is the bolt pattern for a 2009 Toyota Venza?
The 2009 Toyota Venza uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Venza have the same bolt pattern as the 2009?
The Toyota Venza uses the 5x114.3 pattern from 2009 through 2024. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What is the factory wheel offset for a 2009 Toyota Venza?
The OEM offset for the 2009 Venza is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2009 Toyota Venza?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
Will wheels from another Toyota fit my 2009 Venza?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
Can I use spacers on my 2009 Toyota Venza?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset