1995 Toyota Xtra Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Toyota Xtra Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 10-25mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
1995 Xtra Cab — Year-Specific Fitment Context
The 1995 model year is the final year of the Toyota Xtra Cab's 6x139.7 bolt pattern run (since 1992). Wheels from any 1992–1995 Toyota Xtra Cab are cross-compatible with the 1995 model.
Toyota Xtra Cab Bolt Pattern by Year
The table below shows how the Xtra Cab's wheel specifications have changed over the years. The 1995 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 1995 Toyota Xtra Cab
For your 1995 Toyota Xtra Cab, the critical center bore is 106.1mm. Aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is tight: 10-25mm. Sticking to this range avoids rubbing on suspension or fenders. Always use M12x1.5 lug nuts with the correct seat—cone or ball seat depending on your wheel. Mixing seat types can cause wheel loss. This is the final year for the 6x139.7 bolt pattern (1992-1995), so wheels from those years are direct fit.
Historical Fitment Data Reference
In our dataset, Toyota Xtra Cab appears from 1992 to 1995 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 35.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Verify wheel bore diameter; if larger than 106.1mm, use hub-centric rings to avoid vibrations.
- ✅ Check offset carefully: too low (under 10mm) may contact brake calipers; too high (over 25mm) may rub fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Toyota Xtra Cab — Frequently Asked Questions
What is the bolt pattern for a 1995 Toyota Xtra Cab?
The 1995 Toyota Xtra Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 10-25mmmm.
What other years of Toyota Xtra Cab have the same bolt pattern as the 1995?
The Toyota Xtra Cab uses the 6x139.7 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What is the center bore of a 1995 Toyota Xtra Cab?
The factory center bore (hub bore) for the 1995 Toyota Xtra Cab is 106.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 1995 Toyota Xtra Cab?
The OEM offset for the 1995 Xtra Cab is typically around 10-25mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 106.1mm center bore important for the 1995 Xtra Cab?
The 106.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 1995 Toyota Xtra Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 10-25mmmm, and a center bore of at least 106.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset