1992 Toyota Xtra Cab Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Toyota Xtra Cab, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Lug Nut / Bolt Size M12x1.5
Center Bore (CB) 106.1 mm
Offset (ET) 10-25mm
Torque Specs 80 ft-lbs (108 Nm)

1992 Xtra Cab — Year-Specific Fitment Context

The 1992 model year marks the beginning of the Toyota Xtra Cab's 6x139.7 bolt pattern era, which continued through 1995 (4 consecutive years). Wheels from any 1992–1995 Toyota Xtra Cab are cross-compatible with the 1992 model.

Toyota Xtra Cab Bolt Pattern by Year

The table below shows how the Xtra Cab's wheel specifications have changed over the years. The 1992 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 1992 6x139.7 106.1 10-25mm
1993 6x139.7 106.1 10-25mm
1994 6x139.7 106.1 10-25mm
1995 6x139.7 106.1 10-25mm

Fitment Notes

The 1992 Toyota Xtra Cab has a bolt pattern of 6x139.7.

Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".

This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Toyota Xtra Cab appears from 1992 to 1995 (4 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

6x139.7 Pattern Context

This bolt pattern appears on 1067 vehicles in our current database and is considered common.

Examples of other vehicles using 6x139.7:

1992 Toyota Xtra Cab — Frequently Asked Questions

What is the bolt pattern for a 1992 Toyota Xtra Cab?

The 1992 Toyota Xtra Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 10-25mmmm.

What other years of Toyota Xtra Cab have the same bolt pattern as the 1992?

The Toyota Xtra Cab uses the 6x139.7 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.

What is the center bore of a 1992 Toyota Xtra Cab?

The factory center bore (hub bore) for the 1992 Toyota Xtra Cab is 106.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

What is the PCD for a 1992 Toyota Xtra Cab?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 Xtra Cab, the PCD is 6x139.7.

What is the factory wheel offset for a 1992 Toyota Xtra Cab?

The OEM offset for the 1992 Xtra Cab is typically around 10-25mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

How tight should I torque the lug nuts on a 1992 Toyota Xtra Cab?

Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Toyota Xtra Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1992 Toyota Xtra Cab, please report it via our About page contact so we can verify and update this record.

Toyota Xtra Cab By Year

1992 1993 1994 1995

Other Toyota Models

Corolla Cross Crown Signia GR Corolla Grand Highlander Hybrid Highlander Highlander Hybrid Prius Prius Plug-in Hybrid Prius c Regular Cab Solara T100 Regular Cab T100 Xtracab Tacoma Regular Cab Tacoma XtraCab Tundra Access Cab Tundra Hybrid CrewMax Venza Yaris bZ4X