2000 Volkswagen Passat Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Volkswagen Passat, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2000 Passat — Year-Specific Fitment Context
The 2000 Volkswagen Passat is in year 2 of 24 using the 5x112 pattern (1999–2022). Wheels from any 1999–2022 Volkswagen Passat are cross-compatible with the 2000 model. Across its full production run (1992–2022), the Passat has also used: 4x100, 5x100.
Volkswagen Passat Bolt Pattern by Year
The table below shows how the Passat's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 57.1 | 38 |
| 1993 | 4x100 | 57.1 | 38 |
| 1994 | 4x100 | 57.1 | 38 |
| 1995 | 4x100 | 57.1 | 38 |
| 1996 | 4x100 | 57.1 | 38 |
| 1997 | 4x100 | 57.1 | 38 |
| 1998 | 4x100 | 57.1 | 38 |
| 1999 | 5x112 | 57.1 | 45 |
| ▸ 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2003 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45-50 |
| 2007 | 5x112 | 57.1 | 45-50 |
| 2008 | 5x112 | 57.1 | 45-50 |
| 2009 | 5x112 | 57.1 | 45-50 |
| 2010 | 5x112 | 57.1 | 40-50 |
| 2012 | 5x112 | 57.1 | 40-50 |
| 2013 | 5x112 | 57.1 | 40-50 |
| 2014 | 5x112 | 57.1 | 40-50 |
| 2015 | 5x112 | 57.1 | 40-50 |
| 2016 | 5x112 | 57.1 | 40-50 |
| 2017 | 5x112 | 57.1 | 40-50 |
| 2018 | 5x112 | 57.1 | 40-50 |
| 2019 | 5x112 | 57.1 | 40-50 |
| 2020 | 5x112 | 57.1 | 40-50 |
| 2021 | 5x112 | 57.1 | 40-50 |
| 2022 | 5x112 | 57.1 | 40-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2000 Volkswagen Passat
For your 2000 Volkswagen Passat, the bolt pattern is 5x112 with a critical center bore of 57.1mm. Aftermarket wheels often have a larger bore (e.g., 66.6mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset is sensitive; stock is around 45mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type: use conical (60-degree) or ball-seat lugs as specified. Never mix seat types. Improper lug nuts can lead to wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Volkswagen Passat appears from 1992 to 2022 (30 model years). Across model years, this model appears with 3 bolt patterns (4x100, 5x100, 5x112).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 89 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings (57.1mm ID) are installed to avoid vibrations.
- ✅ Check for brake caliper clearance when changing offset; 45mm is safe, but lower offsets may require spacers or caliper grinding.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Volkswagen Passat — Frequently Asked Questions
What is the bolt pattern for a 2000 Volkswagen Passat?
The 2000 Volkswagen Passat uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45mm.
What other years of Volkswagen Passat have the same bolt pattern as the 2000?
The Volkswagen Passat uses the 5x112 pattern from 1999 through 2022. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What does 45mm offset mean for the 2000 Passat?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volkswagen.
Can I put aftermarket wheels on my 2000 Volkswagen Passat?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 45mm, and a center bore of at least 57.1mm (using hub rings if larger).
What is the center bore of a 2000 Volkswagen Passat?
The factory center bore (hub bore) for the 2000 Volkswagen Passat is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2000 Volkswagen Passat?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset