2007 Volkswagen Passat Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Volkswagen Passat, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 Passat — Year-Specific Fitment Context
The 2007 Volkswagen Passat is in year 9 of 24 using the 5x112 pattern (1999–2022). Wheels from any 1999–2022 Volkswagen Passat are cross-compatible with the 2007 model. Across its full production run (1992–2022), the Passat has also used: 4x100, 5x100.
Volkswagen Passat Bolt Pattern by Year
The table below shows how the Passat's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 57.1 | 38 |
| 1993 | 4x100 | 57.1 | 38 |
| 1994 | 4x100 | 57.1 | 38 |
| 1995 | 4x100 | 57.1 | 38 |
| 1996 | 4x100 | 57.1 | 38 |
| 1997 | 4x100 | 57.1 | 38 |
| 1998 | 4x100 | 57.1 | 38 |
| 1999 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2003 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45-50 |
| ▸ 2007 | 5x112 | 57.1 | 45-50 |
| 2008 | 5x112 | 57.1 | 45-50 |
| 2009 | 5x112 | 57.1 | 45-50 |
| 2010 | 5x112 | 57.1 | 40-50 |
| 2012 | 5x112 | 57.1 | 40-50 |
| 2013 | 5x112 | 57.1 | 40-50 |
| 2014 | 5x112 | 57.1 | 40-50 |
| 2015 | 5x112 | 57.1 | 40-50 |
| 2016 | 5x112 | 57.1 | 40-50 |
| 2017 | 5x112 | 57.1 | 40-50 |
| 2018 | 5x112 | 57.1 | 40-50 |
| 2019 | 5x112 | 57.1 | 40-50 |
| 2020 | 5x112 | 57.1 | 40-50 |
| 2021 | 5x112 | 57.1 | 40-50 |
| 2022 | 5x112 | 57.1 | 40-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2007 Volkswagen Passat
The 2007 Volkswagen Passat uses a 5x112 bolt pattern with a 57.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 45-50mm; deviating may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—either conical (60-degree) or ball seat, as VW typically uses ball seat. Mixing seat types can lead to loose wheels. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Volkswagen Passat appears from 1992 to 2022 (30 model years). Across model years, this model appears with 3 bolt patterns (4x100, 5x100, 5x112).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 89 ft-lb after 50-100 miles.
- ✅ Avoid using universal fit wheels without hub rings; they may cause vibration.
- ✅ Check for brake caliper clearance, especially with aftermarket wheels.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Volkswagen Passat — Frequently Asked Questions
What is the bolt pattern for a 2007 Volkswagen Passat?
The 2007 Volkswagen Passat uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45-50mm.
What other years of Volkswagen Passat have the same bolt pattern as the 2007?
The Volkswagen Passat uses the 5x112 pattern from 1999 through 2022. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Do 2007 Volkswagen Passats use lug bolts or lug nuts?
The 2007 Passat requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Volkswagen fit my 2007 Passat?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
What is the factory wheel offset for a 2007 Volkswagen Passat?
The OEM offset for the 2007 Passat is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 45-50mm offset mean for the 2007 Passat?
An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volkswagen.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset