2018 Volkswagen Passat Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Volkswagen Passat, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 Passat — Year-Specific Fitment Context
The 2018 Volkswagen Passat is in year 20 of 24 using the 5x112 pattern (1999–2022). Wheels from any 1999–2022 Volkswagen Passat are cross-compatible with the 2018 model. Across its full production run (1992–2022), the Passat has also used: 4x100, 5x100.
Volkswagen Passat Bolt Pattern by Year
The table below shows how the Passat's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 57.1 | 38 |
| 1993 | 4x100 | 57.1 | 38 |
| 1994 | 4x100 | 57.1 | 38 |
| 1995 | 4x100 | 57.1 | 38 |
| 1996 | 4x100 | 57.1 | 38 |
| 1997 | 4x100 | 57.1 | 38 |
| 1998 | 4x100 | 57.1 | 38 |
| 1999 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2003 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45-50 |
| 2007 | 5x112 | 57.1 | 45-50 |
| 2008 | 5x112 | 57.1 | 45-50 |
| 2009 | 5x112 | 57.1 | 45-50 |
| 2010 | 5x112 | 57.1 | 40-50 |
| 2012 | 5x112 | 57.1 | 40-50 |
| 2013 | 5x112 | 57.1 | 40-50 |
| 2014 | 5x112 | 57.1 | 40-50 |
| 2015 | 5x112 | 57.1 | 40-50 |
| 2016 | 5x112 | 57.1 | 40-50 |
| 2017 | 5x112 | 57.1 | 40-50 |
| ▸ 2018 | 5x112 | 57.1 | 40-50 |
| 2019 | 5x112 | 57.1 | 40-50 |
| 2020 | 5x112 | 57.1 | 40-50 |
| 2021 | 5x112 | 57.1 | 40-50 |
| 2022 | 5x112 | 57.1 | 40-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2018 Volkswagen Passat
The 2018 Volkswagen Passat uses a 5x112 bolt pattern with a 57.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The recommended offset range is 40-50mm; deviating may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type—VW typically uses ball seats, but aftermarket wheels may require conical seats. Using incorrect lug nuts can lead to wheel loosening. For optimal safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Volkswagen Passat appears from 1992 to 2022 (30 model years). Across model years, this model appears with 3 bolt patterns (4x100, 5x100, 5x112).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a smaller center bore than 57.1mm without hub-centric rings.
- ✅ Check offset carefully: offsets below 40mm may cause inner tire rubbing on struts.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Volkswagen Passat — Frequently Asked Questions
What is the bolt pattern for a 2018 Volkswagen Passat?
The 2018 Volkswagen Passat uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40-50mm.
What other years of Volkswagen Passat have the same bolt pattern as the 2018?
The Volkswagen Passat uses the 5x112 pattern from 1999 through 2022. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Why is matching the 57.1mm center bore important for the 2018 Passat?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2018 Volkswagen Passat?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How tight should I torque the lug nuts on a 2018 Volkswagen Passat?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Volkswagen fit my 2018 Passat?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset