2013 Volkswagen Passat Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Volkswagen Passat, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2013 Passat — Year-Specific Fitment Context
The 2013 Volkswagen Passat is in year 15 of 24 using the 5x112 pattern (1999–2022). Wheels from any 1999–2022 Volkswagen Passat are cross-compatible with the 2013 model. Across its full production run (1992–2022), the Passat has also used: 4x100, 5x100.
Volkswagen Passat Bolt Pattern by Year
The table below shows how the Passat's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 57.1 | 38 |
| 1993 | 4x100 | 57.1 | 38 |
| 1994 | 4x100 | 57.1 | 38 |
| 1995 | 4x100 | 57.1 | 38 |
| 1996 | 4x100 | 57.1 | 38 |
| 1997 | 4x100 | 57.1 | 38 |
| 1998 | 4x100 | 57.1 | 38 |
| 1999 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2003 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45-50 |
| 2007 | 5x112 | 57.1 | 45-50 |
| 2008 | 5x112 | 57.1 | 45-50 |
| 2009 | 5x112 | 57.1 | 45-50 |
| 2010 | 5x112 | 57.1 | 40-50 |
| 2012 | 5x112 | 57.1 | 40-50 |
| ▸ 2013 | 5x112 | 57.1 | 40-50 |
| 2014 | 5x112 | 57.1 | 40-50 |
| 2015 | 5x112 | 57.1 | 40-50 |
| 2016 | 5x112 | 57.1 | 40-50 |
| 2017 | 5x112 | 57.1 | 40-50 |
| 2018 | 5x112 | 57.1 | 40-50 |
| 2019 | 5x112 | 57.1 | 40-50 |
| 2020 | 5x112 | 57.1 | 40-50 |
| 2021 | 5x112 | 57.1 | 40-50 |
| 2022 | 5x112 | 57.1 | 40-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2013 Volkswagen Passat
For your 2013 Volkswagen Passat, the critical center bore is 57.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range is 40-50mm; deviating can cause rubbing or poor handling. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—either conical (60-degree) or ball seat, as specified by the wheel manufacturer. Mixing seat types can lead to loose wheels. Wheels from 1999–2022 Passats are direct fit, but verify offset and bore. Safety first: improper fitment compromises braking and steering.
Historical Fitment Data Reference
In our dataset, Volkswagen Passat appears from 1992 to 2022 (30 model years). Across model years, this model appears with 3 bolt patterns (4x100, 5x100, 5x112).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations may occur.
- ✅ Check for brake caliper clearance, especially with aftermarket wheels and low offsets.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Volkswagen Passat — Frequently Asked Questions
What is the bolt pattern for a 2013 Volkswagen Passat?
The 2013 Volkswagen Passat uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40-50mm.
What other years of Volkswagen Passat have the same bolt pattern as the 2013?
The Volkswagen Passat uses the 5x112 pattern from 1999 through 2022. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Do 2013 Volkswagen Passats use lug bolts or lug nuts?
The 2013 Passat requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2013 Volkswagen Passat?
The factory center bore (hub bore) for the 2013 Volkswagen Passat is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 40-50mm offset mean for the 2013 Passat?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volkswagen.
Why is matching the 57.1mm center bore important for the 2013 Passat?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset