2008 Volkswagen Passat Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Volkswagen Passat, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Passat — Year-Specific Fitment Context
The 2008 Volkswagen Passat is in year 10 of 24 using the 5x112 pattern (1999–2022). Wheels from any 1999–2022 Volkswagen Passat are cross-compatible with the 2008 model. Across its full production run (1992–2022), the Passat has also used: 4x100, 5x100.
Volkswagen Passat Bolt Pattern by Year
The table below shows how the Passat's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 57.1 | 38 |
| 1993 | 4x100 | 57.1 | 38 |
| 1994 | 4x100 | 57.1 | 38 |
| 1995 | 4x100 | 57.1 | 38 |
| 1996 | 4x100 | 57.1 | 38 |
| 1997 | 4x100 | 57.1 | 38 |
| 1998 | 4x100 | 57.1 | 38 |
| 1999 | 5x112 | 57.1 | 45 |
| 2000 | 5x112 | 57.1 | 45 |
| 2001 | 5x112 | 57.1 | 45 |
| 2002 | 5x112 | 57.1 | 45 |
| 2003 | 5x112 | 57.1 | 45 |
| 2004 | 5x112 | 57.1 | 45 |
| 2005 | 5x112 | 57.1 | 45 |
| 2006 | 5x112 | 57.1 | 45-50 |
| 2007 | 5x112 | 57.1 | 45-50 |
| ▸ 2008 | 5x112 | 57.1 | 45-50 |
| 2009 | 5x112 | 57.1 | 45-50 |
| 2010 | 5x112 | 57.1 | 40-50 |
| 2012 | 5x112 | 57.1 | 40-50 |
| 2013 | 5x112 | 57.1 | 40-50 |
| 2014 | 5x112 | 57.1 | 40-50 |
| 2015 | 5x112 | 57.1 | 40-50 |
| 2016 | 5x112 | 57.1 | 40-50 |
| 2017 | 5x112 | 57.1 | 40-50 |
| 2018 | 5x112 | 57.1 | 40-50 |
| 2019 | 5x112 | 57.1 | 40-50 |
| 2020 | 5x112 | 57.1 | 40-50 |
| 2021 | 5x112 | 57.1 | 40-50 |
| 2022 | 5x112 | 57.1 | 40-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2008 Volkswagen Passat
For your 2008 Volkswagen Passat, the 5x112 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 66.6mm), requiring hub-centric rings to prevent vibrations. The offset range is tight: 45-50mm. Straying outside this can cause rubbing on struts or fenders. Always use lug nuts with the correct 14x1.5 thread pitch and proper seat type—either cone or ball seat, matching the wheel. Mixing seat types can lead to loose wheels. Re-torque after 50-100 miles. Avoid wheels from 4x100 or 5x100 Passats (pre-1999 or certain models). Stick to 1999-2022 Passat wheels for direct fit.
Historical Fitment Data Reference
In our dataset, Volkswagen Passat appears from 1992 to 2022 (30 model years). Across model years, this model appears with 3 bolt patterns (4x100, 5x100, 5x112).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 89 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 57.1mm and outer diameter matches wheel bore.
- ✅ Avoid wheels with offset below 45mm (rubs strut) or above 50mm (rubs fender).
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Volkswagen Passat — Frequently Asked Questions
What is the bolt pattern for a 2008 Volkswagen Passat?
The 2008 Volkswagen Passat uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45-50mm.
What other years of Volkswagen Passat have the same bolt pattern as the 2008?
The Volkswagen Passat uses the 5x112 pattern from 1999 through 2022. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What lug nut size does the 2008 Volkswagen Passat use?
The 2008 Volkswagen Passat uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2008 Volkswagen Passat?
The factory center bore (hub bore) for the 2008 Volkswagen Passat is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Volkswagen fit my 2008 Passat?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
Why is matching the 57.1mm center bore important for the 2008 Passat?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset