2010 Volvo C30 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Volvo C30, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 C30 — Year-Specific Fitment Context
The 2010 Volvo C30 is in year 3 of 6 using the 5x108 pattern (2008–2013). Wheels from any 2008–2013 Volvo C30 are cross-compatible with the 2010 model.
Volvo C30 Bolt Pattern by Year
The table below shows how the C30's wheel specifications have changed over the years. The 2010 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2010 Volvo C30
When selecting wheels for your 2010 Volvo C30, the center bore must be 63.4mm or larger; if larger, use hub-centric rings to prevent vibrations. The offset is sensitive: stick to 46mm ±5mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—Volvo uses a conical (60-degree) seat. Never mix seat types; improper seating can cause wheel loss. Aftermarket wheels often require specific lug nuts; verify compatibility. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Volvo C30 appears from 2008 to 2013 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50-100 miles.
- ✅ Avoid wheels with offset below 40mm; they may rub the fenders.
- ✅ Use only conical seat lug nuts; ball seat or shank nuts are unsafe.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Volvo C30 — Frequently Asked Questions
What is the bolt pattern for a 2010 Volvo C30?
The 2010 Volvo C30 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 46mm.
What other years of Volvo C30 have the same bolt pattern as the 2010?
The Volvo C30 uses the 5x108 pattern from 2008 through 2013. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What lug nut size does the 2010 Volvo C30 use?
The 2010 Volvo C30 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 63.4mm center bore important for the 2010 C30?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2010 Volvo C30?
The factory center bore (hub bore) for the 2010 Volvo C30 is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2010 Volvo C30?
The OEM offset for the 2010 C30 is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset