2013 Volvo C30 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Volvo C30, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 C30 — Year-Specific Fitment Context
The 2013 model year is the final year of the Volvo C30's 5x108 bolt pattern run (since 2008). Wheels from any 2008–2013 Volvo C30 are cross-compatible with the 2013 model.
Volvo C30 Bolt Pattern by Year
The table below shows how the C30's wheel specifications have changed over the years. The 2013 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2013 Volvo C30
For your 2013 Volvo C30, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive; the factory 46mm offset is optimal. Deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use ball seats, while aftermarket wheels typically require conical (60-degree) seats. Mixing seat types can lead to wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Volvo C30 appears from 2008 to 2013 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 63.4mm; outer diameter must match wheel's hub bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended lug studs or bolts maintain proper thread engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Volvo C30 — Frequently Asked Questions
What is the bolt pattern for a 2013 Volvo C30?
The 2013 Volvo C30 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 46mm.
What other years of Volvo C30 have the same bolt pattern as the 2013?
The Volvo C30 uses the 5x108 pattern from 2008 through 2013. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What is the center bore of a 2013 Volvo C30?
The factory center bore (hub bore) for the 2013 Volvo C30 is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2013 Volvo C30 use?
The 2013 Volvo C30 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2013 Volvo C30?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 C30, the PCD is 5x108.
Can I use spacers on my 2013 Volvo C30?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset