2009 Volvo C30 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Volvo C30, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2009 C30 — Year-Specific Fitment Context
The 2009 Volvo C30 is in year 2 of 6 using the 5x108 pattern (2008–2013). Wheels from any 2008–2013 Volvo C30 are cross-compatible with the 2009 model.
Volvo C30 Bolt Pattern by Year
The table below shows how the C30's wheel specifications have changed over the years. The 2009 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2009 Volvo C30
For your 2009 Volvo C30, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 65.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—Volvo uses a conical (60-degree) seat. Never use ball-seat or acorn-style nuts. Improper lug nut selection can lead to wheel loosening. Verify offset and bore compatibility before purchase.
Historical Fitment Data Reference
In our dataset, Volvo C30 appears from 2008 to 2013 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check brake caliper clearance when using wheels with offset below 40mm or above 50mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Volvo C30 — Frequently Asked Questions
What is the bolt pattern for a 2009 Volvo C30?
The 2009 Volvo C30 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 46mm.
What other years of Volvo C30 have the same bolt pattern as the 2009?
The Volvo C30 uses the 5x108 pattern from 2008 through 2013. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
Will wheels from another Volvo fit my 2009 C30?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Do 2009 Volvo C30s use lug bolts or lug nuts?
The 2009 C30 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2009 Volvo C30?
The OEM offset for the 2009 C30 is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2009 Volvo C30?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset