2012 Volvo C30 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Volvo C30, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2012 C30 — Year-Specific Fitment Context
The 2012 Volvo C30 is in year 5 of 6 using the 5x108 pattern (2008–2013). Wheels from any 2008–2013 Volvo C30 are cross-compatible with the 2012 model.
Volvo C30 Bolt Pattern by Year
The table below shows how the C30's wheel specifications have changed over the years. The 2012 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2012 Volvo C30
When selecting wheels for your 2012 Volvo C30, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The stock offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues with struts and fenders. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—Volvo typically uses ball seats, but aftermarket wheels may require conical (60-degree) or shank-style nuts. Mismatched seats can lead to loose wheels and catastrophic failure. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Volvo C30 appears from 2008 to 2013 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 Nm (76 ft-lbs) after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub rings; the 63.4mm bore is specific to Volvo and Ford platforms.
- ✅ Check inner clearance for aftermarket wheels: offset below 40mm may contact strut, above 50mm may rub fender.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Volvo C30 — Frequently Asked Questions
What is the bolt pattern for a 2012 Volvo C30?
The 2012 Volvo C30 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 46mm.
What other years of Volvo C30 have the same bolt pattern as the 2012?
The Volvo C30 uses the 5x108 pattern from 2008 through 2013. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What is the PCD for a 2012 Volvo C30?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 C30, the PCD is 5x108.
What is the center bore of a 2012 Volvo C30?
The factory center bore (hub bore) for the 2012 Volvo C30 is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2012 Volvo C30?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Why is matching the 63.4mm center bore important for the 2012 C30?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset