2013 Volvo C70 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Volvo C70, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 C70 — Year-Specific Fitment Context
The 2013 model year is the final year of the Volvo C70's 5x108 bolt pattern run (since 1998). Wheels from any 1998–2013 Volvo C70 are cross-compatible with the 2013 model.
Volvo C70 Bolt Pattern by Year
The table below shows how the C70's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x108 | 65.1 | 43 |
| 1999 | 5x108 | 65.1 | 43 |
| 2000 | 5x108 | 65.1 | 43 |
| 2001 | 5x108 | 65.1 | 43 |
| 2002 | 5x108 | 65.1 | 43 |
| 2003 | 5x108 | 65.1 | 43 |
| 2004 | 5x108 | 65.1 | 43 |
| 2006 | 5x108 | 65.1 | 43 |
| 2007 | 5x108 | 63.4 | 45 |
| 2008 | 5x108 | 63.4 | 45 |
| 2009 | 5x108 | 63.4 | 45 |
| 2010 | 5x108 | 63.4 | 45 |
| 2011 | 5x108 | 63.4 | 45 |
| 2012 | 5x108 | 63.4 | 45 |
| ▸ 2013 | 5x108 | 63.4 | 45 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2013 Volvo C70
For the 2013 Volvo C70, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive; the factory 45mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—Volvo uses a conical (60-degree) seat. Flat or ball-seat nuts can loosen, leading to wheel detachment. Verify lug nut torque to 103 ft-lb and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Volvo C70 appears from 1998 to 2013 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 2.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 ft-lb after 50 miles of driving to account for settling.
- ✅ Avoid wheels with offset below 40mm or above 50mm to prevent rubbing on struts or fenders.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 63.4mm bore; otherwise, vibrations may occur.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Volvo C70 — Frequently Asked Questions
What is the bolt pattern for a 2013 Volvo C70?
The 2013 Volvo C70 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Volvo C70 have the same bolt pattern as the 2013?
The Volvo C70 uses the 5x108 pattern from 1998 through 2013. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Do 2013 Volvo C70s use lug bolts or lug nuts?
The 2013 C70 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2013 Volvo C70?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 45mm, and a center bore of at least 63.4mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2013 Volvo C70?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2013 Volvo C70?
The factory center bore (hub bore) for the 2013 Volvo C70 is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset