2026 Volvo V60 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Volvo V60 is 5x108. It has a center bore of 63.4 mm, an offset range of 45-55, and utilizes 14x1.5 (Ball seat, 19mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Volvo V60 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Center Bore (Hub Bore) | 63.4 mm |
| Offset Range (ET) | 45-55 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 V60 — Year-Specific Fitment Context
The 2026 model year is the final year of the Volvo V60's 5x108 bolt pattern run (since 2015). Wheels from any 2015–2026 Volvo V60 are cross-compatible with the 2026 model.
Volvo V60 Bolt Pattern by Year
Looking for all generations? View the complete Volvo V60 (2015–2026) Bolt Pattern & Generation Guide →
The table below shows how the V60's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Volvo V60 Wheel Interchange & Donor Fitment Guide (5x108)
The 5x108 bolt pattern is shared by 606 vehicles in our database (common). For safe wheel swaps on the 2026 Volvo V60, donor rims must match the 5x108 PCD and have a center bore of at least 63.4 mm:
DIRECT HUB MATCH Same 5x108 Pattern & Exact 63.4mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Volvo C40 Recharge | 63.4 mm (Exact) | 45-50 | 14x1.5 (Ball) |
| 2025 Volvo EC40 | 63.4 mm (Exact) | 40-50 | 14x1.5 (Ball) |
| 2025 Volvo EX30 | 63.4 mm (Exact) | 45-50 | 14x1.5 (Cone) |
| 2025 Volvo EX40 | 63.4 mm (Exact) | 40-50 | 14x1.5 (Ball) |
| 2025 Volvo EX90 | 63.4 mm (Exact) | 45-50 | 14x1.5 (Ball) |
| 2024 Volvo NE42 | 63.4 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x108 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2016 Volvo S80 | 65.1 mm | 65.1mm → 63.4mm |
52,5 |
| 1996 Volvo 850 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 1992 Lincoln Continental | 70.5 mm | 70.5mm → 63.4mm |
40 |
| 2005 Maserati GranSport | 67.1 mm | 67.1mm → 63.4mm |
53 |
| 1992 Volvo 240 | 65.1 mm | 65.1mm → 63.4mm |
25 |
| 1998 Volvo C70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Volvo V60 — Frequently Asked Questions
What is the bolt pattern for a 2026 Volvo V60?
The 2026 Volvo V60 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45-55mm.
What other years of Volvo V60 have the same bolt pattern as the 2026?
The Volvo V60 uses the 5x108 pattern from 2015 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the center bore of a 2026 Volvo V60?
The factory center bore (hub bore) for the 2026 Volvo V60 is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2026 Volvo?
The 2026 V60 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 45-55mm offset mean for the 2026 V60?
An offset of 45-55mm means the wheel's mounting surface is 45-55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
What is the factory wheel offset for a 2026 Volvo V60?
The OEM offset for the 2026 V60 is typically around 45-55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →