2011 Volvo XC70 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Volvo XC70, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 XC70 — Year-Specific Fitment Context
The 2011 Volvo XC70 is in year 9 of 14 using the 5x108 pattern (2003–2016). Wheels from any 2003–2016 Volvo XC70 are cross-compatible with the 2011 model.
Volvo XC70 Bolt Pattern by Year
The table below shows how the XC70's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x108 | 65.1 | 43 |
| 2004 | 5x108 | 65.1 | 43 |
| 2005 | 5x108 | 65.1 | 43 |
| 2006 | 5x108 | 65.1 | 43 |
| 2007 | 5x108 | 65.1 | 43 |
| 2008 | 5x108 | 65.1 | 43 |
| 2009 | 5x108 | 63.4 | 50 |
| 2010 | 5x108 | 63.4 | 50 |
| ▸ 2011 | 5x108 | 63.4 | 50 |
| 2012 | 5x108 | 63.4 | 50 |
| 2013 | 5x108 | 63.4 | 50 |
| 2014 | 5x108 | 63.4 | 50 |
| 2015 | 5x108 | 63.4 | 50 |
| 2016 | 5x108 | 63.4 | 50 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2011 Volvo XC70
The 2011 Volvo XC70 uses a 5x108 bolt pattern with a 63.4mm center bore. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify offset with a test fit. Use only B 14x1.50 lug nuts with the correct seat type: factory wheels use ball seat, while many aftermarket wheels require conical (60-degree) seat. Mixing seat types can lead to wheel loosening. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Volvo XC70 appears from 2003 to 2016 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50-100 miles.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 63.4mm bore.
- ✅ Check offset carefully: wheels with offset below 45mm may rub the strut, above 55mm may contact the fender.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Volvo XC70 — Frequently Asked Questions
What is the bolt pattern for a 2011 Volvo XC70?
The 2011 Volvo XC70 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Volvo XC70 have the same bolt pattern as the 2011?
The Volvo XC70 uses the 5x108 pattern from 2003 through 2016. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What lug nut size does the 2011 Volvo XC70 use?
The 2011 Volvo XC70 uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Volvo fit my 2011 XC70?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
How tight should I torque the lug nuts on a 2011 Volvo XC70?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2011 Volvo?
The 2011 XC70 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset