2008 Acura RL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Acura RL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 RL — Year-Specific Fitment Context
The 2008 Acura RL is in year 13 of 17 using the 5x120 pattern (1996–2012). Wheels from any 1996–2012 Acura RL are cross-compatible with the 2008 model.
Acura RL Bolt Pattern by Year
The table below shows how the RL's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 5x120 | 64.1 | 50 |
| 1997 | 5x120 | 64.1 | 50 |
| 1998 | 5x120 | 64.1 | 50 |
| 1999 | 5x120 | 64.1 | 50 |
| 2000 | 5x120 | 64.1 | 50 |
| 2001 | 5x120 | 64.1 | 50 |
| 2002 | 5x120 | 64.1 | 50 |
| 2003 | 5x120 | 64.1 | 50 |
| 2004 | 5x120 | 64.1 | 50 |
| 2005 | 5x120 | 64.1 | 50 |
| 2006 | 5x120 | 64.1 | 50 |
| 2007 | 5x120 | 64.1 | 50 |
| ▸ 2008 | 5x120 | 64.1 | 50 |
| 2009 | 5x120 | 64.1 | 50 |
| 2010 | 5x120 | 64.1 | 50 |
| 2011 | 5x120 | 64.1 | 50 |
| 2012 | 5x120 | 64.1 | 50 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2008 Acura RL
For your 2008 Acura RL, the bolt pattern is 5x120 with a center bore of 64.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 64.1mm or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is critical: stock is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (cone or ball) matching the wheel. Improper lug nuts can lead to wheel detachment. Verify compatibility with 1996–2012 RL models for direct fitment.
Historical Fitment Data Reference
In our dataset, Acura RL appears from 1996 to 2012 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using universal fit wheels without hub rings; the 64.1mm bore is specific and mismatch causes vibration.
- ✅ Check inner clearance for offset changes; 50mm is tight, and lower offset may contact struts or fenders.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Acura RL — Frequently Asked Questions
What is the bolt pattern for a 2008 Acura RL?
The 2008 Acura RL uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Acura RL have the same bolt pattern as the 2008?
The Acura RL uses the 5x120 pattern from 1996 through 2012. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the center bore of a 2008 Acura RL?
The factory center bore (hub bore) for the 2008 Acura RL is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2008 Acura RLs use lug bolts or lug nuts?
The 2008 RL requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2008 Acura RL?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 RL, the PCD is 5x120.
How do I measure the bolt pattern on my 2008 Acura?
The 2008 RL uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset