1997 Acura RL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Acura RL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1997 RL — Year-Specific Fitment Context
The 1997 Acura RL is in year 2 of 17 using the 5x120 pattern (1996–2012). Wheels from any 1996–2012 Acura RL are cross-compatible with the 1997 model.
Acura RL Bolt Pattern by Year
The table below shows how the RL's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 5x120 | 64.1 | 50 |
| ▸ 1997 | 5x120 | 64.1 | 50 |
| 1998 | 5x120 | 64.1 | 50 |
| 1999 | 5x120 | 64.1 | 50 |
| 2000 | 5x120 | 64.1 | 50 |
| 2001 | 5x120 | 64.1 | 50 |
| 2002 | 5x120 | 64.1 | 50 |
| 2003 | 5x120 | 64.1 | 50 |
| 2004 | 5x120 | 64.1 | 50 |
| 2005 | 5x120 | 64.1 | 50 |
| 2006 | 5x120 | 64.1 | 50 |
| 2007 | 5x120 | 64.1 | 50 |
| 2008 | 5x120 | 64.1 | 50 |
| 2009 | 5x120 | 64.1 | 50 |
| 2010 | 5x120 | 64.1 | 50 |
| 2011 | 5x120 | 64.1 | 50 |
| 2012 | 5x120 | 64.1 | 50 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 1997 Acura RL
For your 1997 Acura RL, the 5x120 bolt pattern is shared across 1996–2012 models, ensuring cross-compatibility. The 64.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 50mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct 14x1.5 thread pitch and matching seat type (cone or ball) to avoid wheel loosening. Never use incorrect lug nuts—this is a safety hazard. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Acura RL appears from 1996 to 2012 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50 miles of driving to account for settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 64.1mm bore; otherwise, vibrations may occur.
- ✅ Avoid spacers unless necessary; if used, ensure extended lug studs and proper offset to maintain safe thread engagement.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Acura RL — Frequently Asked Questions
What is the bolt pattern for a 1997 Acura RL?
The 1997 Acura RL uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Acura RL have the same bolt pattern as the 1997?
The Acura RL uses the 5x120 pattern from 1996 through 2012. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Will wheels from another Acura fit my 1997 RL?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
What is the center bore of a 1997 Acura RL?
The factory center bore (hub bore) for the 1997 Acura RL is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 1997 Acura RL?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1997 RL, the PCD is 5x120.
How tight should I torque the lug nuts on a 1997 Acura RL?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset