2011 Acura RL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Acura RL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 RL — Year-Specific Fitment Context
The 2011 Acura RL is in year 16 of 17 using the 5x120 pattern (1996–2012). Wheels from any 1996–2012 Acura RL are cross-compatible with the 2011 model.
Acura RL Bolt Pattern by Year
The table below shows how the RL's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 5x120 | 64.1 | 50 |
| 1997 | 5x120 | 64.1 | 50 |
| 1998 | 5x120 | 64.1 | 50 |
| 1999 | 5x120 | 64.1 | 50 |
| 2000 | 5x120 | 64.1 | 50 |
| 2001 | 5x120 | 64.1 | 50 |
| 2002 | 5x120 | 64.1 | 50 |
| 2003 | 5x120 | 64.1 | 50 |
| 2004 | 5x120 | 64.1 | 50 |
| 2005 | 5x120 | 64.1 | 50 |
| 2006 | 5x120 | 64.1 | 50 |
| 2007 | 5x120 | 64.1 | 50 |
| 2008 | 5x120 | 64.1 | 50 |
| 2009 | 5x120 | 64.1 | 50 |
| 2010 | 5x120 | 64.1 | 50 |
| ▸ 2011 | 5x120 | 64.1 | 50 |
| 2012 | 5x120 | 64.1 | 50 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2011 Acura RL
For the 2011 Acura RL, the bolt pattern is 5x120 with a center bore of 64.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations and ensure proper load distribution. The offset is critical; the factory offset is 50mm, and deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the RL uses 14x1.5 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel separation. For optimal safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Acura RL appears from 1996 to 2012 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 64.1mm to avoid vibrations.
- ✅ Stick to offsets between 45mm and 55mm to maintain proper clearance and handling.
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles to ensure they haven't loosened.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Acura RL — Frequently Asked Questions
What is the bolt pattern for a 2011 Acura RL?
The 2011 Acura RL uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Acura RL have the same bolt pattern as the 2011?
The Acura RL uses the 5x120 pattern from 1996 through 2012. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2011 Acura?
The 2011 RL uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2011 Acura RLs use lug bolts or lug nuts?
The 2011 RL requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2011 Acura RL?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 50mm, and a center bore of at least 64.1mm (using hub rings if larger).
What is the PCD for a 2011 Acura RL?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 RL, the PCD is 5x120.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset