2012 Acura RL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Acura RL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2012 RL — Year-Specific Fitment Context
The 2012 model year is the final year of the Acura RL's 5x120 bolt pattern run (since 1996). Wheels from any 1996–2012 Acura RL are cross-compatible with the 2012 model.
Acura RL Bolt Pattern by Year
The table below shows how the RL's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 5x120 | 64.1 | 50 |
| 1997 | 5x120 | 64.1 | 50 |
| 1998 | 5x120 | 64.1 | 50 |
| 1999 | 5x120 | 64.1 | 50 |
| 2000 | 5x120 | 64.1 | 50 |
| 2001 | 5x120 | 64.1 | 50 |
| 2002 | 5x120 | 64.1 | 50 |
| 2003 | 5x120 | 64.1 | 50 |
| 2004 | 5x120 | 64.1 | 50 |
| 2005 | 5x120 | 64.1 | 50 |
| 2006 | 5x120 | 64.1 | 50 |
| 2007 | 5x120 | 64.1 | 50 |
| 2008 | 5x120 | 64.1 | 50 |
| 2009 | 5x120 | 64.1 | 50 |
| 2010 | 5x120 | 64.1 | 50 |
| 2011 | 5x120 | 64.1 | 50 |
| ▸ 2012 | 5x120 | 64.1 | 50 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2012 Acura RL
For your 2012 Acura RL, the bolt pattern is 5x120 with a 64.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to match the 64.1mm bore, preventing vibrations and ensuring proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the thread pitch is 14x1.5, and the seat type must match (factory uses ball seat; aftermarket wheels often require conical/tapered seat lugs). Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Acura RL appears from 1996 to 2012 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles, as wheels can settle.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to avoid vibrations.
- ✅ Avoid wheels with offset below 45mm or above 55mm to prevent rubbing on suspension or fenders.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Acura RL — Frequently Asked Questions
What is the bolt pattern for a 2012 Acura RL?
The 2012 Acura RL uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Acura RL have the same bolt pattern as the 2012?
The Acura RL uses the 5x120 pattern from 1996 through 2012. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What is the factory wheel offset for a 2012 Acura RL?
The OEM offset for the 2012 RL is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2012 Acura RL?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 50mm, and a center bore of at least 64.1mm (using hub rings if larger).
What does 50mm offset mean for the 2012 RL?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Acura.
Do 2012 Acura RLs use lug bolts or lug nuts?
The 2012 RL requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset