2010 Acura RL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Acura RL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 RL — Year-Specific Fitment Context
The 2010 Acura RL is in year 15 of 17 using the 5x120 pattern (1996–2012). Wheels from any 1996–2012 Acura RL are cross-compatible with the 2010 model.
Acura RL Bolt Pattern by Year
The table below shows how the RL's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 5x120 | 64.1 | 50 |
| 1997 | 5x120 | 64.1 | 50 |
| 1998 | 5x120 | 64.1 | 50 |
| 1999 | 5x120 | 64.1 | 50 |
| 2000 | 5x120 | 64.1 | 50 |
| 2001 | 5x120 | 64.1 | 50 |
| 2002 | 5x120 | 64.1 | 50 |
| 2003 | 5x120 | 64.1 | 50 |
| 2004 | 5x120 | 64.1 | 50 |
| 2005 | 5x120 | 64.1 | 50 |
| 2006 | 5x120 | 64.1 | 50 |
| 2007 | 5x120 | 64.1 | 50 |
| 2008 | 5x120 | 64.1 | 50 |
| 2009 | 5x120 | 64.1 | 50 |
| ▸ 2010 | 5x120 | 64.1 | 50 |
| 2011 | 5x120 | 64.1 | 50 |
| 2012 | 5x120 | 64.1 | 50 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2010 Acura RL
For your 2010 Acura RL, the 5x120 bolt pattern is shared with 1996–2012 models, but the 64.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 72.6mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive: stock is 50mm, but 45–55mm is acceptable. Going lower (e.g., 35mm) may cause rubbing or bearing stress. Always use 14x1.5 lug nuts with the correct seat (conical 60-degree for most aftermarket wheels; ball seat for OEM). Improper lug nuts can loosen or damage the wheel. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Acura RL appears from 1996 to 2012 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid using wheels from non-Acura 5x120 vehicles (e.g., BMW) as their center bore (72.6mm) requires rings and offset may differ.
- ✅ Check brake caliper clearance when using aftermarket wheels; some designs may require spacers to clear the caliper.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Acura RL — Frequently Asked Questions
What is the bolt pattern for a 2010 Acura RL?
The 2010 Acura RL uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Acura RL have the same bolt pattern as the 2010?
The Acura RL uses the 5x120 pattern from 1996 through 2012. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What does 50mm offset mean for the 2010 RL?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Acura.
Why is matching the 64.1mm center bore important for the 2010 RL?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2010 Acura RL use?
The 2010 Acura RL uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2010 Acura?
The 2010 RL uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset