2008 Buick LaCrosse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Buick LaCrosse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 LaCrosse — Year-Specific Fitment Context
The 2008 Buick LaCrosse is in year 4 of 15 using the 5x115 pattern (2005–2019). Wheels from any 2005–2019 Buick LaCrosse are cross-compatible with the 2008 model. Across its full production run (2005–2019), the LaCrosse has also used: 5x120.
Buick LaCrosse Bolt Pattern by Year
The table below shows how the LaCrosse's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2005 | 5x115 | 70.3 | 45 |
| 2006 | 5x115 | 70.3 | 45 |
| 2007 | 5x115 | 70.3 | 45 |
| ▸ 2008 | 5x115 | 70.3 | 45 |
| 2009 | 5x115 | 70.3 | 45 |
| 2010 | 5x115 | 70.3 | 45 |
| 2011 | 5x120 | 67.1 | 45 |
| 2012 | 5x120 | 67.1 | 45 |
| 2013 | 5x120 | 67.1 | 45 |
| 2014 | 5x120 | 67.1 | 45 |
| 2015 | 5x120 | 67.1 | 45 |
| 2016 | 5x120 | 67.1 | 45 |
| 2017 | 5x120 | 67.1 | 45 |
| 2018 | 5x115 | 70.3 | 49 |
| 2019 | 5x115 | 70.3 | 49 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2008 Buick LaCrosse
When selecting wheels for your 2008 Buick LaCrosse, the 70.3mm center bore is critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 45mm; staying within ±5mm maintains handling and clearance. Using incorrect offset can cause rubbing or premature bearing wear. Always verify lug nut thread pitch (12x1.50) and seat type—factory uses conical (60-degree) seats. Mixing seat types (e.g., ball seat) can lead to loose wheels and catastrophic failure. Cross-compatible wheels from 2005–2019 LaCrosse models share the 5x115 pattern, but avoid 5x120 wheels without proper adapters.
Historical Fitment Data Reference
In our dataset, Buick LaCrosse appears from 2005 to 2019 (15 model years). Across model years, this model appears with 2 bolt patterns (5x115, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 4.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel seating and gasket compression.
- ✅ When using hub-centric rings, ensure they are made of metal (aluminum or steel) to withstand heat and torque; plastic rings can deform.
- ✅ Check brake caliper clearance when changing offset or wheel design, as the 2008 LaCrosse has tight tolerances that may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Buick LaCrosse — Frequently Asked Questions
What is the bolt pattern for a 2008 Buick LaCrosse?
The 2008 Buick LaCrosse uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 45mm.
What other years of Buick LaCrosse have the same bolt pattern as the 2008?
The Buick LaCrosse uses the 5x115 pattern from 2005 through 2019. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Why is matching the 70.3mm center bore important for the 2008 LaCrosse?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2008 Buick LaCrosse?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How tight should I torque the lug nuts on a 2008 Buick LaCrosse?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2008 Buick LaCrosse?
The factory center bore (hub bore) for the 2008 Buick LaCrosse is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset