2010 Buick LaCrosse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Buick LaCrosse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 LaCrosse — Year-Specific Fitment Context
The 2010 Buick LaCrosse is in year 6 of 15 using the 5x115 pattern (2005–2019). Wheels from any 2005–2019 Buick LaCrosse are cross-compatible with the 2010 model. Important: starting in 2011, Buick switched to 5x120 — those wheels will not fit the 2010 model. Across its full production run (2005–2019), the LaCrosse has also used: 5x120.
Buick LaCrosse Bolt Pattern by Year
The table below shows how the LaCrosse's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2005 | 5x115 | 70.3 | 45 |
| 2006 | 5x115 | 70.3 | 45 |
| 2007 | 5x115 | 70.3 | 45 |
| 2008 | 5x115 | 70.3 | 45 |
| 2009 | 5x115 | 70.3 | 45 |
| ▸ 2010 | 5x115 | 70.3 | 45 |
| 2011 | 5x120 | 67.1 | 45 |
| 2012 | 5x120 | 67.1 | 45 |
| 2013 | 5x120 | 67.1 | 45 |
| 2014 | 5x120 | 67.1 | 45 |
| 2015 | 5x120 | 67.1 | 45 |
| 2016 | 5x120 | 67.1 | 45 |
| 2017 | 5x120 | 67.1 | 45 |
| 2018 | 5x115 | 70.3 | 49 |
| 2019 | 5x115 | 70.3 | 49 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2010 Buick LaCrosse
For your 2010 Buick LaCrosse, the bolt pattern is 5x115 with a center bore of 70.3mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The recommended offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.5) and seat type—use conical (60-degree) or ball seat lugs as specified. Avoid wheels from 2011+ LaCrosse models (5x120) as they are incompatible. Proper fitment ensures safety and performance.
Historical Fitment Data Reference
In our dataset, Buick LaCrosse appears from 2005 to 2019 (15 model years). Across model years, this model appears with 2 bolt patterns (5x115, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 4.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using wheels with a larger center bore without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check brake caliper clearance when using wheels with offset lower than 40mm, as the 2010 LaCrosse has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Buick LaCrosse — Frequently Asked Questions
What is the bolt pattern for a 2010 Buick LaCrosse?
The 2010 Buick LaCrosse uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 45mm.
What other years of Buick LaCrosse have the same bolt pattern as the 2010?
The Buick LaCrosse uses the 5x115 pattern from 2005 through 2019. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Will 2011 Buick LaCrosse wheels fit a 2010 model?
No. The 2011 Buick LaCrosse switched to a 5x120 bolt pattern, which is not compatible with the 2010 model's 5x115. Using mismatched patterns is unsafe.
Can I put aftermarket wheels on my 2010 Buick LaCrosse?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 45mm, and a center bore of at least 70.3mm (using hub rings if larger).
What is the factory wheel offset for a 2010 Buick LaCrosse?
The OEM offset for the 2010 LaCrosse is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 70.3mm center bore important for the 2010 LaCrosse?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset