2006 Cadillac SRX Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Cadillac SRX, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 6x115
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 70.3 mm
Offset (ET) 50
Torque Specs 80 ft-lbs (108 Nm)

2006 SRX — Year-Specific Fitment Context

The 2006 Cadillac SRX is in year 3 of 7 using the 6x115 pattern (2004–2010). Wheels from any 2004–2010 Cadillac SRX are cross-compatible with the 2006 model. Across its full production run (2004–2016), the SRX has also used: 6x120.65.

Cadillac SRX Bolt Pattern by Year

The table below shows how the SRX's wheel specifications have changed over the years. The 2006 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2004 6x115 70.3 50
2005 6x115 70.3 50
▸ 2006 6x115 70.3 50
2007 6x115 70.3 50
2008 6x115 70.3 50
2009 6x115 70.3 50
2010 6x115 70.3 50
2011 6x120.65 67.1 52
2012 6x120.65 67.1 52
2013 6x120.65 67.1 52
2014 6x120.65 67.1 52
2015 6x120.65 67.1 52
2016 6x120.65 67.1 52

Fitment Notes

The 2006 Cadillac SRX has a bolt pattern of 6x115.

This means it is a 6 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Cadillac SRX appears from 2004 to 2016 (13 model years).

Across model years, this model appears with 2 bolt patterns (6x115, 6x120.65).

6x115 Pattern Context

This bolt pattern appears on 15 vehicles in our current database and is considered uncommon.

Examples of other vehicles using 6x115:

2006 Cadillac SRX — Frequently Asked Questions

What is the bolt pattern for a 2006 Cadillac SRX?

The 2006 Cadillac SRX uses a 6x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 50mm.

What other years of Cadillac SRX have the same bolt pattern as the 2006?

The Cadillac SRX uses the 6x115 pattern from 2004 through 2010. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.

Can I put aftermarket wheels on my 2006 Cadillac SRX?

Absolutely. Just ensure the aftermarket wheels have a 6x115 bolt pattern, an offset near 50mm, and a center bore of at least 70.3mm (using hub rings if larger).

What is the factory wheel offset for a 2006 Cadillac SRX?

The OEM offset for the 2006 SRX is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Can I use spacers on my 2006 Cadillac SRX?

Yes, but ensure the wheel spacers match the 6x115 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.

What does 50mm offset mean for the 2006 SRX?

An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Cadillac.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Cadillac SRX has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2006 Cadillac SRX, please report it via our About page contact so we can verify and update this record.

Cadillac SRX By Year

2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016

Other Cadillac Models

ATS-V Brougham CT4 CTS CTS-V Celestiq DTS Eldorado Escalade Escalade ESV Escalade EXT Escalade IQ Fleetwood OPTIQ SRX STS XT4 XT5 XT6 XTS