2010 Cadillac SRX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Cadillac SRX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 SRX — Year-Specific Fitment Context
The 2010 model year is the final year of the Cadillac SRX's 6x115 bolt pattern run (since 2004). Wheels from any 2004–2010 Cadillac SRX are cross-compatible with the 2010 model. Important: starting in 2011, Cadillac switched to 6x120.65 — those wheels will not fit the 2010 model. Across its full production run (2004–2016), the SRX has also used: 6x120.65.
Cadillac SRX Bolt Pattern by Year
The table below shows how the SRX's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x115 | 70.3 | 50 |
| 2005 | 6x115 | 70.3 | 50 |
| 2006 | 6x115 | 70.3 | 50 |
| 2007 | 6x115 | 70.3 | 50 |
| 2008 | 6x115 | 70.3 | 50 |
| 2009 | 6x115 | 70.3 | 50 |
| ▸ 2010 | 6x115 | 70.3 | 50 |
| 2011 | 6x120.65 | 67.1 | 52 |
| 2012 | 6x120.65 | 67.1 | 52 |
| 2013 | 6x120.65 | 67.1 | 52 |
| 2014 | 6x120.65 | 67.1 | 52 |
| 2015 | 6x120.65 | 67.1 | 52 |
| 2016 | 6x120.65 | 67.1 | 52 |
6x115 Pattern Context
This bolt pattern appears on 15 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x115:
Expert Buying Guide for 2010 Cadillac SRX
For your 2010 Cadillac SRX, the bolt pattern is 6x115 with a 70.3mm center bore. When selecting aftermarket wheels, ensure they have a center bore of at least 70.3mm or use hub-centric rings to avoid vibration. The factory offset is 50mm; staying within ±5mm is recommended to prevent rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.50) and proper seat type—conical (60-degree) or ball seat—matching the wheel's design. Never reuse old lug nuts with new wheels. Re-torque after 50-100 miles. Note: 2011+ SRX wheels (6x120.65) do not fit.
Historical Fitment Data Reference
In our dataset, Cadillac SRX appears from 2004 to 2016 (13 model years). Across model years, this model appears with 2 bolt patterns (6x115, 6x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 2.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 70.3mm to prevent vibration.
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels from 2011+ SRX models as they have a different bolt pattern (6x120.65).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Cadillac SRX — Frequently Asked Questions
What is the bolt pattern for a 2010 Cadillac SRX?
The 2010 Cadillac SRX uses a 6x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 50mm.
What other years of Cadillac SRX have the same bolt pattern as the 2010?
The Cadillac SRX uses the 6x115 pattern from 2004 through 2010. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Will 2011 Cadillac SRX wheels fit a 2010 model?
No. The 2011 Cadillac SRX switched to a 6x120.65 bolt pattern, which is not compatible with the 2010 model's 6x115. Using mismatched patterns is unsafe.
What is the PCD for a 2010 Cadillac SRX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 SRX, the PCD is 6x115.
Can I put aftermarket wheels on my 2010 Cadillac SRX?
Absolutely. Just ensure the aftermarket wheels have a 6x115 bolt pattern, an offset near 50mm, and a center bore of at least 70.3mm (using hub rings if larger).
What is the factory wheel offset for a 2010 Cadillac SRX?
The OEM offset for the 2010 SRX is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset