2012 Cadillac SRX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Cadillac SRX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x120.65 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 52 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2012 SRX — Year-Specific Fitment Context
The 2012 Cadillac SRX is in year 2 of 6 using the 6x120.65 pattern (2011–2016). Wheels from any 2011–2016 Cadillac SRX are cross-compatible with the 2012 model. Across its full production run (2004–2016), the SRX has also used: 6x115.
Cadillac SRX Bolt Pattern by Year
The table below shows how the SRX's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x115 | 70.3 | 50 |
| 2005 | 6x115 | 70.3 | 50 |
| 2006 | 6x115 | 70.3 | 50 |
| 2007 | 6x115 | 70.3 | 50 |
| 2008 | 6x115 | 70.3 | 50 |
| 2009 | 6x115 | 70.3 | 50 |
| 2010 | 6x115 | 70.3 | 50 |
| 2011 | 6x120.65 | 67.1 | 52 |
| ▸ 2012 | 6x120.65 | 67.1 | 52 |
| 2013 | 6x120.65 | 67.1 | 52 |
| 2014 | 6x120.65 | 67.1 | 52 |
| 2015 | 6x120.65 | 67.1 | 52 |
| 2016 | 6x120.65 | 67.1 | 52 |
6x120.65 Pattern Context
This bolt pattern appears on 6 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x120.65:
Expert Buying Guide for 2012 Cadillac SRX
For the 2012 Cadillac SRX, the critical fitment specs are: bolt pattern 6x120.65, center bore 67.1mm, offset 52mm, and lug nut size 14x1.50 with a cone seat. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibration and stress on lug studs. The offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues with brakes and suspension. Always verify lug nut thread pitch (14x1.50) and seat type—aftermarket wheels often require conical (60-degree) lug nuts, while factory wheels use a ball seat. Improper lug nuts can lead to wheel loosening. Wheels from 2011–2016 SRX models are direct fit.
Historical Fitment Data Reference
In our dataset, Cadillac SRX appears from 2004 to 2016 (13 model years). Across model years, this model appears with 2 bolt patterns (6x115, 6x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 2.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a smaller center bore; hub-centric rings are mandatory for aftermarket wheels with a larger bore.
- ✅ Check brake caliper clearance when changing offset—the 52mm offset is tight; a lower offset may push the wheel outward and contact the fender.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Cadillac SRX — Frequently Asked Questions
What is the bolt pattern for a 2012 Cadillac SRX?
The 2012 Cadillac SRX uses a 6x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 52mm.
What other years of Cadillac SRX have the same bolt pattern as the 2012?
The Cadillac SRX uses the 6x120.65 pattern from 2011 through 2016. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Do 2012 Cadillac SRXs use lug bolts or lug nuts?
The 2012 SRX requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2012 Cadillac SRX?
Absolutely. Just ensure the aftermarket wheels have a 6x120.65 bolt pattern, an offset near 52mm, and a center bore of at least 67.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2012 Cadillac?
The 2012 SRX uses a 6x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2012 Cadillac SRX?
The factory center bore (hub bore) for the 2012 Cadillac SRX is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset