2007 Cadillac SRX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Cadillac SRX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 SRX — Year-Specific Fitment Context
The 2007 Cadillac SRX is in year 4 of 7 using the 6x115 pattern (2004–2010). Wheels from any 2004–2010 Cadillac SRX are cross-compatible with the 2007 model. Across its full production run (2004–2016), the SRX has also used: 6x120.65.
Cadillac SRX Bolt Pattern by Year
The table below shows how the SRX's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x115 | 70.3 | 50 |
| 2005 | 6x115 | 70.3 | 50 |
| 2006 | 6x115 | 70.3 | 50 |
| ▸ 2007 | 6x115 | 70.3 | 50 |
| 2008 | 6x115 | 70.3 | 50 |
| 2009 | 6x115 | 70.3 | 50 |
| 2010 | 6x115 | 70.3 | 50 |
| 2011 | 6x120.65 | 67.1 | 52 |
| 2012 | 6x120.65 | 67.1 | 52 |
| 2013 | 6x120.65 | 67.1 | 52 |
| 2014 | 6x120.65 | 67.1 | 52 |
| 2015 | 6x120.65 | 67.1 | 52 |
| 2016 | 6x120.65 | 67.1 | 52 |
6x115 Pattern Context
This bolt pattern appears on 15 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x115:
Expert Buying Guide for 2007 Cadillac SRX
For your 2007 Cadillac SRX, the bolt pattern is 6x115 with a center bore of 70.3mm. When selecting aftermarket wheels, ensure they have a larger center bore and use hub-centric rings to prevent vibrations and ensure proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree) to avoid wheel loosening. Wheels from 2004–2010 SRX models are directly compatible. Avoid using wheels from later SRX models (2010–2016) which use a 6x120.65 pattern.
Historical Fitment Data Reference
In our dataset, Cadillac SRX appears from 2004 to 2016 (13 model years). Across model years, this model appears with 2 bolt patterns (6x115, 6x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 2.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 Nm (103 lb-ft) after 50 miles of driving.
- ✅ Verify aftermarket wheels have a center bore ≥70.3mm and use hub-centric rings.
- ✅ Check offset carefully: using wheels with offset below 45mm may cause inner tire rub on suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Cadillac SRX — Frequently Asked Questions
What is the bolt pattern for a 2007 Cadillac SRX?
The 2007 Cadillac SRX uses a 6x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 50mm.
What other years of Cadillac SRX have the same bolt pattern as the 2007?
The Cadillac SRX uses the 6x115 pattern from 2004 through 2010. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Do 2007 Cadillac SRXs use lug bolts or lug nuts?
The 2007 SRX requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Cadillac fit my 2007 SRX?
Only if they share the exact same 6x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
Can I use spacers on my 2007 Cadillac SRX?
Yes, but ensure the wheel spacers match the 6x115 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the center bore of a 2007 Cadillac SRX?
The factory center bore (hub bore) for the 2007 Cadillac SRX is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset