2013 Cadillac SRX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Cadillac SRX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x120.65 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 52 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2013 SRX — Year-Specific Fitment Context
The 2013 Cadillac SRX is in year 3 of 6 using the 6x120.65 pattern (2011–2016). Wheels from any 2011–2016 Cadillac SRX are cross-compatible with the 2013 model. Across its full production run (2004–2016), the SRX has also used: 6x115.
Cadillac SRX Bolt Pattern by Year
The table below shows how the SRX's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x115 | 70.3 | 50 |
| 2005 | 6x115 | 70.3 | 50 |
| 2006 | 6x115 | 70.3 | 50 |
| 2007 | 6x115 | 70.3 | 50 |
| 2008 | 6x115 | 70.3 | 50 |
| 2009 | 6x115 | 70.3 | 50 |
| 2010 | 6x115 | 70.3 | 50 |
| 2011 | 6x120.65 | 67.1 | 52 |
| 2012 | 6x120.65 | 67.1 | 52 |
| ▸ 2013 | 6x120.65 | 67.1 | 52 |
| 2014 | 6x120.65 | 67.1 | 52 |
| 2015 | 6x120.65 | 67.1 | 52 |
| 2016 | 6x120.65 | 67.1 | 52 |
6x120.65 Pattern Context
This bolt pattern appears on 6 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x120.65:
Expert Buying Guide for 2013 Cadillac SRX
For your 2013 Cadillac SRX, the correct bolt pattern is 6x120.65mm, shared with 2011–2016 models. The center bore is 67.1mm—critical for hub-centric fitment. Aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive; stock is 52mm. Deviating more than ±5mm may cause rubbing or clearance issues with brakes and suspension. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (conical/60-degree). Using incorrect lug nuts can lead to wheel loosening or damage. Verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Cadillac SRX appears from 2004 to 2016 (13 model years). Across model years, this model appears with 2 bolt patterns (6x115, 6x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 2.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub rings; the 67.1mm bore is specific and mismatch causes vibration.
- ✅ Check brake caliper clearance when changing offset; the SRX has tight tolerances, especially with aftermarket brakes.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Cadillac SRX — Frequently Asked Questions
What is the bolt pattern for a 2013 Cadillac SRX?
The 2013 Cadillac SRX uses a 6x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 52mm.
What other years of Cadillac SRX have the same bolt pattern as the 2013?
The Cadillac SRX uses the 6x120.65 pattern from 2011 through 2016. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What does 52mm offset mean for the 2013 SRX?
An offset of 52mm means the wheel's mounting surface is 52mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Cadillac.
What is the factory wheel offset for a 2013 Cadillac SRX?
The OEM offset for the 2013 SRX is typically around 52mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2013 Cadillac SRX use?
The 2013 Cadillac SRX uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2013 Cadillac SRX?
The factory center bore (hub bore) for the 2013 Cadillac SRX is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset