2011 Cadillac SRX Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2011 Cadillac SRX is 6x120.65. It has a center bore of 67.1 mm, an offset range of 52, and utilizes N 14x1.50 (Cone seat, 22mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2011 Cadillac SRX Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x120.65 |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 52 |
| Thread Size (Lug Nut / Bolt) | N 14x1.50 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2011 SRX — Year-Specific Fitment Context
The 2011 model year marks the beginning of the Cadillac SRX's 6x120.65 bolt pattern era, which continued through 2016 (6 consecutive years). Wheels from any 2011–2016 Cadillac SRX are cross-compatible with the 2011 model. Note: the 2010 model used a different pattern (6x115), so its wheels are NOT interchangeable with the 2011. Across its full production run (2004–2016), the SRX has also used: 6x115.
Cadillac SRX Bolt Pattern by Year
The table below shows how the SRX's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x115 | 70.3 | 50 |
| 2005 | 6x115 | 70.3 | 50 |
| 2006 | 6x115 | 70.3 | 50 |
| 2007 | 6x115 | 70.3 | 50 |
| 2008 | 6x115 | 70.3 | 50 |
| 2009 | 6x115 | 70.3 | 50 |
| 2010 | 6x115 | 70.3 | 50 |
| ▸ 2011 | 6x120.65 | 67.1 | 52 |
| 2012 | 6x120.65 | 67.1 | 52 |
| 2013 | 6x120.65 | 67.1 | 52 |
| 2014 | 6x120.65 | 67.1 | 52 |
| 2015 | 6x120.65 | 67.1 | 52 |
| 2016 | 6x120.65 | 67.1 | 52 |
2011 Cadillac SRX Wheel Interchange & Donor Fitment Guide (6x120.65)
The 6x120.65 bolt pattern is shared by 6 vehicles in our database (uncommon). For safe wheel swaps on the 2011 Cadillac SRX, donor rims must match the 6x120.65 PCD and have a center bore of at least 67.1 mm:
Expert Buying Guide for 2011 Cadillac SRX
For your 2011 Cadillac SRX, the critical specifications are a 6x120.65 bolt pattern, 67.1mm center bore, and 52mm offset. Aftermarket wheels must have a center bore of at least 67.1mm; use hub-centric rings to avoid vibrations if the bore is larger. The offset is sensitive: deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (conical/60-degree taper). Never use ball-seat lug nuts, as they can loosen. Verify that aftermarket wheels are load-rated for the SRX's weight. Proper fitment ensures safety and performance.
Historical Fitment Data Reference
In our dataset, Cadillac SRX appears from 2004 to 2016 (13 model years). Across model years, this model appears with 2 bolt patterns (6x115, 6x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 2.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from the 2010 SRX (6x115 bolt pattern) as they are not compatible.
- ✅ Check that aftermarket wheels have sufficient brake caliper clearance, especially for larger rotors.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2011 Cadillac SRX — Frequently Asked Questions
What is the bolt pattern for a 2011 Cadillac SRX?
The 2011 Cadillac SRX uses a 6x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 52mm.
What other years of Cadillac SRX have the same bolt pattern as the 2011?
The Cadillac SRX uses the 6x120.65 pattern from 2011 through 2016. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I use 2010 Cadillac SRX wheels on a 2011?
No. The 2010 SRX used a 6x115 bolt pattern, which differs from the 2011's 6x120.65. They are not interchangeable.
What is the center bore of a 2011 Cadillac SRX?
The factory center bore (hub bore) for the 2011 Cadillac SRX is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2011 Cadillac SRX use?
The 2011 Cadillac SRX uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2011 Cadillac SRX?
Yes, but ensure the wheel spacers match the 6x120.65 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →