1999 Dodge Ram 2500 Club Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Dodge Ram 2500 Club Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 43 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1999 Ram 2500 Club Cab — Year-Specific Fitment Context
The 1999 model year is the final year of the Dodge Ram 2500 Club Cab's 8x165.1 bolt pattern run (since 1995). Wheels from any 1995–1999 Dodge Ram 2500 Club Cab are cross-compatible with the 1999 model.
Dodge Ram 2500 Club Cab Bolt Pattern by Year
The table below shows how the Ram 2500 Club Cab's wheel specifications have changed over the years. The 1999 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1999 Dodge Ram 2500 Club Cab
For your 1999 Dodge Ram 2500 Club Cab, the 8x165.1 bolt pattern is shared with 1995-1999 models. The 121.3mm center bore is critical; aftermarket wheels often have a larger bore (e.g., 124mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: stock is 43mm; deviations of ±10mm may cause rubbing or clearance issues with brakes and suspension. Always verify lug nut thread pitch (9/16-18) and seat type—factory uses cone seats; aftermarket wheels may require ball or acorn seats. Using incorrect lug nuts can lead to wheel detachment. Safety first: confirm all specs before purchase.
Historical Fitment Data Reference
In our dataset, Dodge Ram 2500 Club Cab appears from 1995 to 1999 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 135-145 ft-lb after 50-100 miles of driving to account for settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 121.3mm center bore to avoid vibrations.
- ✅ Check brake caliper clearance when changing offset; a 43mm offset is optimal for this model.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Dodge Ram 2500 Club Cab — Frequently Asked Questions
What is the bolt pattern for a 1999 Dodge Ram 2500 Club Cab?
The 1999 Dodge Ram 2500 Club Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 43mm.
What other years of Dodge Ram 2500 Club Cab have the same bolt pattern as the 1999?
The Dodge Ram 2500 Club Cab uses the 8x165.1 pattern from 1995 through 1999. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
What does 43mm offset mean for the 1999 Ram 2500 Club Cab?
An offset of 43mm means the wheel's mounting surface is 43mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
What is the factory wheel offset for a 1999 Dodge Ram 2500 Club Cab?
The OEM offset for the 1999 Ram 2500 Club Cab is typically around 43mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 1999 Dodge Ram 2500 Club Cab?
Refer to your owner's manual for exact specs, but always tighten the 9/16 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 1999 Dodge Ram 2500 Club Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1999 Ram 2500 Club Cab, the PCD is 8x165.1.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset