2008 Ford Escape Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Ford Escape, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Escape — Year-Specific Fitment Context
The 2008 Ford Escape is in year 8 of 11 using the 5x114.3 pattern (2001–2011). Wheels from any 2001–2011 Ford Escape are cross-compatible with the 2008 model. Across its full production run (2001–2024), the Escape has also used: 5x108.
Ford Escape Bolt Pattern by Year
The table below shows how the Escape's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 67.1 | 45 |
| 2002 | 5x114.3 | 67.1 | 45 |
| 2003 | 5x114.3 | 67.1 | 45 |
| 2004 | 5x114.3 | 67.1 | 45 |
| 2005 | 5x114.3 | 67.1 | 45 |
| 2006 | 5x114.3 | 67.1 | 45 |
| 2007 | 5x114.3 | 67.1 | 45 |
| ▸ 2008 | 5x114.3 | 67.1 | 45 |
| 2009 | 5x114.3 | 67.1 | 45 |
| 2010 | 5x114.3 | 67.1 | 45 |
| 2011 | 5x114.3 | 67.1 | 45 |
| 2012 | 5x108 | 63.4 | 52 |
| 2013 | 5x108 | 63.4 | 52 |
| 2014 | 5x108 | 63.4 | 52 |
| 2015 | 5x108 | 63.4 | 52 |
| 2016 | 5x108 | 63.4 | 52 |
| 2017 | 5x108 | 63.4 | 52 |
| 2018 | 5x108 | 63.4 | 52 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
| 2021 | 5x108 | 63.4 | 38 |
| 2022 | 5x108 | 63.4 | 38 |
| 2023 | 5x108 | 63.4 | 38 |
| 2024 | 5x108 | 63.4 | 38 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Ford Escape
The 2008 Ford Escape uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, ensure the bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The recommended offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree). Never mix seat types—using the wrong seat can lead to wheel loosening. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Escape appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 4
- Observed total offset span across years: 14.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore smaller than 67.1mm; they will not fit over the hub.
- ✅ If using aftermarket wheels with a larger bore, always install hub-centric rings to prevent vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Ford Escape — Frequently Asked Questions
What is the bolt pattern for a 2008 Ford Escape?
The 2008 Ford Escape uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of Ford Escape have the same bolt pattern as the 2008?
The Ford Escape uses the 5x114.3 pattern from 2001 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Why is matching the 67.1mm center bore important for the 2008 Escape?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2008 Ford Escape?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2008 Ford Escape?
The factory center bore (hub bore) for the 2008 Ford Escape is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2008 Ford?
The 2008 Escape uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset