2013 Ford Escape Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Ford Escape, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 52 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2013 Escape — Year-Specific Fitment Context
The 2013 Ford Escape is in year 2 of 13 using the 5x108 pattern (2012–2024). Wheels from any 2012–2024 Ford Escape are cross-compatible with the 2013 model. Across its full production run (2001–2024), the Escape has also used: 5x114.3.
Ford Escape Bolt Pattern by Year
The table below shows how the Escape's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 67.1 | 45 |
| 2002 | 5x114.3 | 67.1 | 45 |
| 2003 | 5x114.3 | 67.1 | 45 |
| 2004 | 5x114.3 | 67.1 | 45 |
| 2005 | 5x114.3 | 67.1 | 45 |
| 2006 | 5x114.3 | 67.1 | 45 |
| 2007 | 5x114.3 | 67.1 | 45 |
| 2008 | 5x114.3 | 67.1 | 45 |
| 2009 | 5x114.3 | 67.1 | 45 |
| 2010 | 5x114.3 | 67.1 | 45 |
| 2011 | 5x114.3 | 67.1 | 45 |
| 2012 | 5x108 | 63.4 | 52 |
| ▸ 2013 | 5x108 | 63.4 | 52 |
| 2014 | 5x108 | 63.4 | 52 |
| 2015 | 5x108 | 63.4 | 52 |
| 2016 | 5x108 | 63.4 | 52 |
| 2017 | 5x108 | 63.4 | 52 |
| 2018 | 5x108 | 63.4 | 52 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
| 2021 | 5x108 | 63.4 | 38 |
| 2022 | 5x108 | 63.4 | 38 |
| 2023 | 5x108 | 63.4 | 38 |
| 2024 | 5x108 | 63.4 | 38 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2013 Ford Escape
The 2013 Ford Escape uses a 5x108 bolt pattern with a 63.4mm center bore. When installing aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 52mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify that aftermarket wheels have a compatible offset and sufficient brake caliper clearance. Use only lug nuts with the correct thread pitch (14x1.50) and proper seat type—factory wheels use a cone seat. Never mix seat types; incorrect lug nuts can loosen or damage the wheel. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Escape appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 4
- Observed total offset span across years: 14.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles of driving to ensure proper seating.
- ✅ Aftermarket wheels with a larger center bore require hub-centric rings; avoid relying solely on lug nuts for centering.
- ✅ Check for brake caliper clearance when using wheels with offset less than 47mm or greater than 57mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Ford Escape — Frequently Asked Questions
What is the bolt pattern for a 2013 Ford Escape?
The 2013 Ford Escape uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 52mm.
What other years of Ford Escape have the same bolt pattern as the 2013?
The Ford Escape uses the 5x108 pattern from 2012 through 2024. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2013 Ford Escape?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 52mm, and a center bore of at least 63.4mm (using hub rings if larger).
What is the center bore of a 2013 Ford Escape?
The factory center bore (hub bore) for the 2013 Ford Escape is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2013 Ford Escape use?
The 2013 Ford Escape uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2013 Ford?
The 2013 Escape uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset