2002 Ford Excursion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Ford Excursion, along with offset and center bore data.
2002 Ford Excursion Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 10 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2002 Excursion — Year-Specific Fitment Context
The 2002 Ford Excursion is in year 3 of 6 using the 8x170 pattern (2000–2005). Wheels from any 2000–2005 Ford Excursion are cross-compatible with the 2002 model.
Ford Excursion Bolt Pattern by Year
The table below shows how the Excursion's wheel specifications have changed over the years. The 2002 model year is highlighted.
8x170 Pattern Context
This bolt pattern appears on 189 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2002 Ford Excursion
For your 2002 Ford Excursion, the 8x170 bolt pattern is shared with 2000–2005 models, ensuring cross-compatibility. The 124.9mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive; the factory spec is 10mm, but aftermarket wheels should stay within ±5mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—factory wheels use a cone seat, while aftermarket may require ball or flat seats. Mismatched lug nuts can cause wheel detachment. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Ford Excursion appears from 2000 to 2005 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain clamping force.
- ✅ Aftermarket wheels with a bore larger than 124.9mm must use hub-centric rings; avoid relying solely on lug nuts for centering.
- ✅ Check offset carefully: too much positive offset can cause inner tire rubbing on suspension components; too negative can cause fender rubbing.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
2002 Ford Excursion — Frequently Asked Questions
What is the bolt pattern for a 2002 Ford Excursion?
The 2002 Ford Excursion uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 10mm.
What other years of Ford Excursion have the same bolt pattern as the 2002?
The Ford Excursion uses the 8x170 pattern from 2000 through 2005. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What is the PCD for a 2002 Ford Excursion?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 Excursion, the PCD is 8x170.
Can I use spacers on my 2002 Ford Excursion?
Yes, but ensure the wheel spacers match the 8x170 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
Will wheels from another Ford fit my 2002 Excursion?
Only if they share the exact same 8x170 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
Why is matching the 124.9mm center bore important for the 2002 Excursion?
The 124.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset