2005 Ford Excursion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2005 Ford Excursion, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 10 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2005 Excursion — Year-Specific Fitment Context
The 2005 model year is the final year of the Ford Excursion's 8x170 bolt pattern run (since 2000). Wheels from any 2000–2005 Ford Excursion are cross-compatible with the 2005 model.
Ford Excursion Bolt Pattern by Year
The table below shows how the Excursion's wheel specifications have changed over the years. The 2005 model year is highlighted.
Fitment Notes
The 2005 Ford Excursion has a bolt pattern of 8x170.
This means it is a 8 lug pattern with a circle diameter of 170mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Excursion appears from 2000 to 2005 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
2005 Ford Excursion — Frequently Asked Questions
What is the bolt pattern for a 2005 Ford Excursion?
The 2005 Ford Excursion uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 10mm.
What other years of Ford Excursion have the same bolt pattern as the 2005?
The Ford Excursion uses the 8x170 pattern from 2000 through 2005. Wheels from any of these model years are dimensionally compatible with the 2005, provided the offset and center bore also match.
What is the PCD for a 2005 Ford Excursion?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2005 Excursion, the PCD is 8x170.
Can I put aftermarket wheels on my 2005 Ford Excursion?
Absolutely. Just ensure the aftermarket wheels have a 8x170 bolt pattern, an offset near 10mm, and a center bore of at least 124.9mm (using hub rings if larger).
What does 10mm offset mean for the 2005 Excursion?
An offset of 10mm means the wheel's mounting surface is 10mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Do 2005 Ford Excursions use lug bolts or lug nuts?
The 2005 Excursion requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Excursion is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2000-2005 (6 model years).
- Observed bolt-pattern variants: 1 (8x170).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2005 Ford Excursion, please report it via our About page contact so we can verify and update this record.