2004 Ford Excursion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Ford Excursion, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 10 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2004 Excursion — Year-Specific Fitment Context
The 2004 Ford Excursion is in year 5 of 6 using the 8x170 pattern (2000–2005). Wheels from any 2000–2005 Ford Excursion are cross-compatible with the 2004 model.
Ford Excursion Bolt Pattern by Year
The table below shows how the Excursion's wheel specifications have changed over the years. The 2004 model year is highlighted.
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2004 Ford Excursion
For the 2004 Ford Excursion, the 8x170 bolt pattern and 124.9mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 130mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. The offset is sensitive; stock is around 10mm, but aftermarket wheels with offsets outside 0-20mm may cause rubbing or clearance issues with brakes/suspension. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (cone seat for most aftermarket wheels; ball seat for OEM). Improper lug nuts can lead to wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Ford Excursion appears from 2000 to 2005 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 165 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 124.9mm; outer diameter must match wheel bore.
- ✅ Check for clearance between wheel spokes and brake calipers, especially with larger brake upgrades.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Ford Excursion — Frequently Asked Questions
What is the bolt pattern for a 2004 Ford Excursion?
The 2004 Ford Excursion uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 10mm.
What other years of Ford Excursion have the same bolt pattern as the 2004?
The Ford Excursion uses the 8x170 pattern from 2000 through 2005. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2004 Ford Excursion?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2004 Ford Excursion use?
The 2004 Ford Excursion uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2004 Ford Excursion?
The OEM offset for the 2004 Excursion is typically around 10mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2004 Ford Excursion?
Yes, but ensure the wheel spacers match the 8x170 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset