2008 Ford F250 Super Duty Super Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Ford F250 Super Duty Super Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2008 F250 Super Duty Super Cab — Year-Specific Fitment Context
The 2008 Ford F250 Super Duty Super Cab is in year 10 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F250 Super Duty Super Cab are cross-compatible with the 2008 model.
Ford F250 Super Duty Super Cab Bolt Pattern by Year
The table below shows how the F250 Super Duty Super Cab's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 124.9 | 40 |
| 2000 | 8x170 | 124.9 | 40 |
| 2001 | 8x170 | 124.9 | 40 |
| 2002 | 8x170 | 124.9 | 40 |
| 2003 | 8x170 | 124.9 | 40 |
| 2004 | 8x170 | 124.9 | 40 |
| 2005 | 8x170 | 124.9 | 40 |
| 2006 | 8x170 | 124.9 | 40 |
| 2007 | 8x170 | 124.9 | 40 |
| ▸ 2008 | 8x170 | 124.9 | 40 |
| 2009 | 8x170 | 124.9 | 40 |
| 2010 | 8x170 | 124.9 | 40 |
| 2011 | 8x170 | 124.9 | 40 |
| 2012 | 8x170 | 124.9 | 40 |
| 2013 | 8x170 | 124.9 | 40 |
| 2014 | 8x170 | 124.9 | 40 |
| 2015 | 8x170 | 124.9 | 40 |
| 2016 | 8x170 | 124.9 | 40 |
| 2017 | 8x170 | 124.9 | 40 |
| 2018 | 8x170 | 124.9 | 40 |
| 2019 | 8x170 | 124.9 | 40 |
| 2020 | 8x170 | 124.9 | 40 |
| 2021 | 8x170 | 124.9 | 40 |
| 2022 | 8x170 | 124.9 | 40 |
| 2024 | 8x170 | 124.9 | 40 |
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2008 Ford F250 Super Duty Super Cab
For your 2008 Ford F250 Super Duty Super Cab, the 8x170 bolt pattern is shared across 1999–2024 models, ensuring broad cross-compatibility. However, the critical center bore of 124.9mm must match exactly; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive—stick to 40mm ±10mm to avoid rubbing or clearance issues with brakes and suspension. Always use lug nuts with the correct 14x1.5 thread pitch and appropriate seat type (cone or ball) to guarantee clamping force. Failure to match these specs compromises safety and wheel integrity.
Historical Fitment Data Reference
In our dataset, Ford F250 Super Duty Super Cab appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain proper clamping force.
- ✅ Verify wheel bore diameter; if using aftermarket wheels, install hub-centric rings to center the wheel on the hub.
- ✅ Check offset carefully; deviations beyond 40mm ±10mm may cause tire rubbing or clearance problems with brake calipers.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Ford F250 Super Duty Super Cab — Frequently Asked Questions
What is the bolt pattern for a 2008 Ford F250 Super Duty Super Cab?
The 2008 Ford F250 Super Duty Super Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 40mm.
What other years of Ford F250 Super Duty Super Cab have the same bolt pattern as the 2008?
The Ford F250 Super Duty Super Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 Ford F250 Super Duty Super Cab?
The OEM offset for the 2008 F250 Super Duty Super Cab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2008 Ford F250 Super Duty Super Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x170 bolt pattern, an offset near 40mm, and a center bore of at least 124.9mm (using hub rings if larger).
Why is matching the 124.9mm center bore important for the 2008 F250 Super Duty Super Cab?
The 124.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2008 Ford F250 Super Duty Super Cabs use lug bolts or lug nuts?
The 2008 F250 Super Duty Super Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset