2011 Ford Focus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Ford Focus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 51 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Focus — Year-Specific Fitment Context
The 2011 Ford Focus is in year 6 of 13 using the 5x108 pattern (2006–2018). Wheels from any 2006–2018 Ford Focus are cross-compatible with the 2011 model. Across its full production run (2000–2018), the Focus has also used: 4x108.
Ford Focus Bolt Pattern by Year
The table below shows how the Focus's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 4x108 | 63.4 | 48 |
| 2001 | 4x108 | 63.4 | 48 |
| 2002 | 4x108 | 63.4 | 48 |
| 2003 | 4x108 | 63.4 | 48 |
| 2004 | 4x108 | 63.4 | 48 |
| 2005 | 4x108 | 63.4 | 48 |
| 2006 | 5x108 | 63.4 | 51 |
| 2007 | 5x108 | 63.4 | 51 |
| 2008 | 5x108 | 63.4 | 51 |
| 2009 | 5x108 | 63.4 | 51 |
| 2010 | 5x108 | 63.4 | 51 |
| ▸ 2011 | 5x108 | 63.4 | 51 |
| 2012 | 5x108 | 63.4 | 51 |
| 2013 | 5x108 | 63.4 | 51 |
| 2014 | 5x108 | 63.4 | 51 |
| 2015 | 5x108 | 63.4 | 51 |
| 2016 | 5x108 | 63.4 | 51 |
| 2017 | 5x108 | 63.4 | 51 |
| 2018 | 5x108 | 63.4 | 51 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2011 Ford Focus
For the 2011 Ford Focus, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 51mm; deviations beyond ±5mm may cause rubbing on struts or fenders. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone seat for factory wheels; ball seat for some aftermarket). Never mix seat types. Re-torque after 50-100 miles. Wheels from 2006-2018 Focus models are direct fit.
Historical Fitment Data Reference
In our dataset, Ford Focus appears from 2000 to 2018 (19 model years). Across model years, this model appears with 2 bolt patterns (4x108, 5x108).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 63.4mm to avoid vibrations.
- ✅ Stick to offset between 46mm and 56mm to prevent clearance issues with suspension and bodywork.
- ✅ Re-torque lug nuts to 85-100 ft-lbs after 50-100 miles of driving, and verify correct cone seat engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Ford Focus — Frequently Asked Questions
What is the bolt pattern for a 2011 Ford Focus?
The 2011 Ford Focus uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 51mm.
What other years of Ford Focus have the same bolt pattern as the 2011?
The Ford Focus uses the 5x108 pattern from 2006 through 2018. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What lug nut size does the 2011 Ford Focus use?
The 2011 Ford Focus uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 51mm offset mean for the 2011 Focus?
An offset of 51mm means the wheel's mounting surface is 51mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What is the PCD for a 2011 Ford Focus?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Focus, the PCD is 5x108.
Can I use spacers on my 2011 Ford Focus?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset