2010 Ford Focus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Ford Focus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 51 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 Focus — Year-Specific Fitment Context
The 2010 Ford Focus is in year 5 of 13 using the 5x108 pattern (2006–2018). Wheels from any 2006–2018 Ford Focus are cross-compatible with the 2010 model. Across its full production run (2000–2018), the Focus has also used: 4x108.
Ford Focus Bolt Pattern by Year
The table below shows how the Focus's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 4x108 | 63.4 | 48 |
| 2001 | 4x108 | 63.4 | 48 |
| 2002 | 4x108 | 63.4 | 48 |
| 2003 | 4x108 | 63.4 | 48 |
| 2004 | 4x108 | 63.4 | 48 |
| 2005 | 4x108 | 63.4 | 48 |
| 2006 | 5x108 | 63.4 | 51 |
| 2007 | 5x108 | 63.4 | 51 |
| 2008 | 5x108 | 63.4 | 51 |
| 2009 | 5x108 | 63.4 | 51 |
| ▸ 2010 | 5x108 | 63.4 | 51 |
| 2011 | 5x108 | 63.4 | 51 |
| 2012 | 5x108 | 63.4 | 51 |
| 2013 | 5x108 | 63.4 | 51 |
| 2014 | 5x108 | 63.4 | 51 |
| 2015 | 5x108 | 63.4 | 51 |
| 2016 | 5x108 | 63.4 | 51 |
| 2017 | 5x108 | 63.4 | 51 |
| 2018 | 5x108 | 63.4 | 51 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2010 Ford Focus
The 2010 Ford Focus uses a 5x108 bolt pattern with a 63.4mm center bore and 51mm offset. When selecting aftermarket wheels, ensure hub-centric rings are used to match the 63.4mm bore, preventing vibrations. The offset is sensitive; staying within ±5mm of 51mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone seat). Ball seat lug nuts are not compatible and can cause wheel loosening. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Focus appears from 2000 to 2018 (19 model years). Across model years, this model appears with 2 bolt patterns (4x108, 5x108).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings for aftermarket wheels to match the 63.4mm center bore.
- ✅ Stick to offset between 46mm and 56mm to avoid clearance problems.
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Ford Focus — Frequently Asked Questions
What is the bolt pattern for a 2010 Ford Focus?
The 2010 Ford Focus uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 51mm.
What other years of Ford Focus have the same bolt pattern as the 2010?
The Ford Focus uses the 5x108 pattern from 2006 through 2018. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What does 51mm offset mean for the 2010 Focus?
An offset of 51mm means the wheel's mounting surface is 51mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What is the factory wheel offset for a 2010 Ford Focus?
The OEM offset for the 2010 Focus is typically around 51mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2010 Ford?
The 2010 Focus uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2010 Ford Focus?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Focus, the PCD is 5x108.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset