2013 Ford Focus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Ford Focus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 51 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 Focus — Year-Specific Fitment Context
The 2013 Ford Focus is in year 8 of 13 using the 5x108 pattern (2006–2018). Wheels from any 2006–2018 Ford Focus are cross-compatible with the 2013 model. Across its full production run (2000–2018), the Focus has also used: 4x108.
Ford Focus Bolt Pattern by Year
The table below shows how the Focus's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 4x108 | 63.4 | 48 |
| 2001 | 4x108 | 63.4 | 48 |
| 2002 | 4x108 | 63.4 | 48 |
| 2003 | 4x108 | 63.4 | 48 |
| 2004 | 4x108 | 63.4 | 48 |
| 2005 | 4x108 | 63.4 | 48 |
| 2006 | 5x108 | 63.4 | 51 |
| 2007 | 5x108 | 63.4 | 51 |
| 2008 | 5x108 | 63.4 | 51 |
| 2009 | 5x108 | 63.4 | 51 |
| 2010 | 5x108 | 63.4 | 51 |
| 2011 | 5x108 | 63.4 | 51 |
| 2012 | 5x108 | 63.4 | 51 |
| ▸ 2013 | 5x108 | 63.4 | 51 |
| 2014 | 5x108 | 63.4 | 51 |
| 2015 | 5x108 | 63.4 | 51 |
| 2016 | 5x108 | 63.4 | 51 |
| 2017 | 5x108 | 63.4 | 51 |
| 2018 | 5x108 | 63.4 | 51 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2013 Ford Focus
The 2013 Ford Focus uses a 5x108 bolt pattern with a 63.4mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The factory offset is 51mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball seat lugs as specified. Improper lug nuts can lead to wheel loss. Re-torque after 50-100 miles. Wheels from 2006-2018 Focus models are direct fit.
Historical Fitment Data Reference
In our dataset, Ford Focus appears from 2000 to 2018 (19 model years). Across model years, this model appears with 2 bolt patterns (4x108, 5x108).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 63.4mm bore is critical for proper centering.
- ✅ Check inner clearance for aftermarket wheels; offsets lower than 45mm may contact struts or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Ford Focus — Frequently Asked Questions
What is the bolt pattern for a 2013 Ford Focus?
The 2013 Ford Focus uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 51mm.
What other years of Ford Focus have the same bolt pattern as the 2013?
The Ford Focus uses the 5x108 pattern from 2006 through 2018. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2013 Ford Focus?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 63.4mm center bore important for the 2013 Focus?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2013 Ford Focus?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 Focus, the PCD is 5x108.
Do 2013 Ford Focuss use lug bolts or lug nuts?
The 2013 Focus requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset