2008 Ford Focus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Ford Focus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 51 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Focus — Year-Specific Fitment Context
The 2008 Ford Focus is in year 3 of 13 using the 5x108 pattern (2006–2018). Wheels from any 2006–2018 Ford Focus are cross-compatible with the 2008 model. Across its full production run (2000–2018), the Focus has also used: 4x108.
Ford Focus Bolt Pattern by Year
The table below shows how the Focus's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 4x108 | 63.4 | 48 |
| 2001 | 4x108 | 63.4 | 48 |
| 2002 | 4x108 | 63.4 | 48 |
| 2003 | 4x108 | 63.4 | 48 |
| 2004 | 4x108 | 63.4 | 48 |
| 2005 | 4x108 | 63.4 | 48 |
| 2006 | 5x108 | 63.4 | 51 |
| 2007 | 5x108 | 63.4 | 51 |
| ▸ 2008 | 5x108 | 63.4 | 51 |
| 2009 | 5x108 | 63.4 | 51 |
| 2010 | 5x108 | 63.4 | 51 |
| 2011 | 5x108 | 63.4 | 51 |
| 2012 | 5x108 | 63.4 | 51 |
| 2013 | 5x108 | 63.4 | 51 |
| 2014 | 5x108 | 63.4 | 51 |
| 2015 | 5x108 | 63.4 | 51 |
| 2016 | 5x108 | 63.4 | 51 |
| 2017 | 5x108 | 63.4 | 51 |
| 2018 | 5x108 | 63.4 | 51 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2008 Ford Focus
For the 2008 Ford Focus, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 51mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify offset with test fitting. Lug nuts are M12x1.50 with a conical (60-degree) seat. Using incorrect thread pitch or seat type (e.g., ball seat) can lead to wheel loss. Re-torque after 50-100 miles. Wheels from 2006-2018 Focus models are direct fit.
Historical Fitment Data Reference
In our dataset, Ford Focus appears from 2000 to 2018 (19 model years). Across model years, this model appears with 2 bolt patterns (4x108, 5x108).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 63.4mm bore exactly.
- ✅ Avoid wheels with offset below 45mm or above 57mm to prevent rubbing on struts or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Ford Focus — Frequently Asked Questions
What is the bolt pattern for a 2008 Ford Focus?
The 2008 Ford Focus uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 51mm.
What other years of Ford Focus have the same bolt pattern as the 2008?
The Ford Focus uses the 5x108 pattern from 2006 through 2018. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 Ford Focus?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 51mm, and a center bore of at least 63.4mm (using hub rings if larger).
What is the factory wheel offset for a 2008 Ford Focus?
The OEM offset for the 2008 Focus is typically around 51mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2008 Ford Focus?
The factory center bore (hub bore) for the 2008 Ford Focus is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Ford fit my 2008 Focus?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset