1996 Ford Ranger Super Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Ford Ranger Super Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 12-20 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1996 Ranger Super Cab — Year-Specific Fitment Context
The 1996 Ford Ranger Super Cab is in year 5 of 20 using the 5x114.3 pattern (1992–2011). Wheels from any 1992–2011 Ford Ranger Super Cab are cross-compatible with the 1996 model.
Ford Ranger Super Cab Bolt Pattern by Year
The table below shows how the Ranger Super Cab's wheel specifications have changed over the years. The 1996 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 12-20 |
| 1993 | 5x114.3 | 70.5 | 12-20 |
| 1994 | 5x114.3 | 70.5 | 12-20 |
| 1995 | 5x114.3 | 70.5 | 12-20 |
| ▸ 1996 | 5x114.3 | 70.5 | 12-20 |
| 1997 | 5x114.3 | 70.5 | 12-20 |
| 1998 | 5x114.3 | 70.5 | 12-20 |
| 1999 | 5x114.3 | 70.5 | 12-20 |
| 2000 | 5x114.3 | 70.5 | 12-20 |
| 2001 | 5x114.3 | 70.5 | 12-20 |
| 2002 | 5x114.3 | 70.5 | 12-20 |
| 2003 | 5x114.3 | 70.5 | 12-20 |
| 2004 | 5x114.3 | 70.5 | 12-20 |
| 2005 | 5x114.3 | 70.5 | 12-20 |
| 2006 | 5x114.3 | 70.5 | 12-20 |
| 2007 | 5x114.3 | 70.5 | 12-20 |
| 2008 | 5x114.3 | 70.5 | 12-20 |
| 2009 | 5x114.3 | 70.5 | 12-20 |
| 2010 | 5x114.3 | 70.5 | 12-20 |
| 2011 | 5x114.3 | 70.5 | 12-20 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1996 Ford Ranger Super Cab
For your 1996 Ford Ranger Super Cab, the bolt pattern is 5x114.3mm with a critical center bore of 70.5mm. Aftermarket wheels often have a larger bore, so hub-centric rings (70.5mm ID to wheel bore OD) are mandatory to prevent vibration and ensure load is on the hub, not the lugs. Offset must stay within 12-20mm; deviating can cause rubbing on suspension or fenders. Use only 1/2-20 lug nuts with the correct seat type: factory wheels use a cone seat (60-degree), while aftermarket may require ball or conical seats. Never mix seat types—improper seating leads to loosening and wheel loss. Always torque to manufacturer specs (typically 85-105 ft-lbs) and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Ford Ranger Super Cab appears from 1992 to 2011 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 32.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to account for wheel settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration at highway speeds.
- ✅ Check for clearance between the wheel spokes and brake calipers, especially with aftermarket wheels that have different spoke profiles.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Ford Ranger Super Cab — Frequently Asked Questions
What is the bolt pattern for a 1996 Ford Ranger Super Cab?
The 1996 Ford Ranger Super Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 12-20mm.
What other years of Ford Ranger Super Cab have the same bolt pattern as the 1996?
The Ford Ranger Super Cab uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Will wheels from another Ford fit my 1996 Ranger Super Cab?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.5mm.
How tight should I torque the lug nuts on a 1996 Ford Ranger Super Cab?
Refer to your owner's manual for exact specs, but always tighten the 1/2 20 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 70.5mm center bore important for the 1996 Ranger Super Cab?
The 70.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 1996 Ford Ranger Super Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1996 Ranger Super Cab, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset