2000 Ford Ranger Super Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Ford Ranger Super Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 12-20 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2000 Ranger Super Cab — Year-Specific Fitment Context
The 2000 Ford Ranger Super Cab is in year 9 of 20 using the 5x114.3 pattern (1992–2011). Wheels from any 1992–2011 Ford Ranger Super Cab are cross-compatible with the 2000 model.
Ford Ranger Super Cab Bolt Pattern by Year
The table below shows how the Ranger Super Cab's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 12-20 |
| 1993 | 5x114.3 | 70.5 | 12-20 |
| 1994 | 5x114.3 | 70.5 | 12-20 |
| 1995 | 5x114.3 | 70.5 | 12-20 |
| 1996 | 5x114.3 | 70.5 | 12-20 |
| 1997 | 5x114.3 | 70.5 | 12-20 |
| 1998 | 5x114.3 | 70.5 | 12-20 |
| 1999 | 5x114.3 | 70.5 | 12-20 |
| ▸ 2000 | 5x114.3 | 70.5 | 12-20 |
| 2001 | 5x114.3 | 70.5 | 12-20 |
| 2002 | 5x114.3 | 70.5 | 12-20 |
| 2003 | 5x114.3 | 70.5 | 12-20 |
| 2004 | 5x114.3 | 70.5 | 12-20 |
| 2005 | 5x114.3 | 70.5 | 12-20 |
| 2006 | 5x114.3 | 70.5 | 12-20 |
| 2007 | 5x114.3 | 70.5 | 12-20 |
| 2008 | 5x114.3 | 70.5 | 12-20 |
| 2009 | 5x114.3 | 70.5 | 12-20 |
| 2010 | 5x114.3 | 70.5 | 12-20 |
| 2011 | 5x114.3 | 70.5 | 12-20 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2000 Ford Ranger Super Cab
For your 2000 Ford Ranger Super Cab, the bolt pattern is 5x114.3mm with a center bore of 70.5mm. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 12-20mm; deviations risk rubbing on suspension or fenders. Use OEM-style lug nuts with a 1/2-20 thread and conical (60-degree) seat—never ball seat. Torque to 85-100 ft-lbs, re-torquing after 50 miles. Cross-compatible with 1992-2011 Ford Ranger models.
Historical Fitment Data Reference
In our dataset, Ford Ranger Super Cab appears from 1992 to 2011 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 32.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a bore larger than 70.5mm to avoid vibrations.
- ✅ Stick to offset between 12-20mm; lower offsets may rub control arms, higher offsets may contact brake calipers.
- ✅ Re-torque lug nuts to 85-100 ft-lbs after 50 miles of driving to ensure proper seating.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Ford Ranger Super Cab — Frequently Asked Questions
What is the bolt pattern for a 2000 Ford Ranger Super Cab?
The 2000 Ford Ranger Super Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 12-20mm.
What other years of Ford Ranger Super Cab have the same bolt pattern as the 2000?
The Ford Ranger Super Cab uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2000 Ford?
The 2000 Ranger Super Cab uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2000 Ford Ranger Super Cab use?
The 2000 Ford Ranger Super Cab uses 1/2 20 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2000 Ford Ranger Super Cabs use lug bolts or lug nuts?
The 2000 Ranger Super Cab requires 1/2 20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 70.5mm center bore important for the 2000 Ranger Super Cab?
The 70.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset