1998 Ford Ranger Super Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Ford Ranger Super Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 12-20 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1998 Ranger Super Cab — Year-Specific Fitment Context
The 1998 Ford Ranger Super Cab is in year 7 of 20 using the 5x114.3 pattern (1992–2011). Wheels from any 1992–2011 Ford Ranger Super Cab are cross-compatible with the 1998 model.
Ford Ranger Super Cab Bolt Pattern by Year
The table below shows how the Ranger Super Cab's wheel specifications have changed over the years. The 1998 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 12-20 |
| 1993 | 5x114.3 | 70.5 | 12-20 |
| 1994 | 5x114.3 | 70.5 | 12-20 |
| 1995 | 5x114.3 | 70.5 | 12-20 |
| 1996 | 5x114.3 | 70.5 | 12-20 |
| 1997 | 5x114.3 | 70.5 | 12-20 |
| ▸ 1998 | 5x114.3 | 70.5 | 12-20 |
| 1999 | 5x114.3 | 70.5 | 12-20 |
| 2000 | 5x114.3 | 70.5 | 12-20 |
| 2001 | 5x114.3 | 70.5 | 12-20 |
| 2002 | 5x114.3 | 70.5 | 12-20 |
| 2003 | 5x114.3 | 70.5 | 12-20 |
| 2004 | 5x114.3 | 70.5 | 12-20 |
| 2005 | 5x114.3 | 70.5 | 12-20 |
| 2006 | 5x114.3 | 70.5 | 12-20 |
| 2007 | 5x114.3 | 70.5 | 12-20 |
| 2008 | 5x114.3 | 70.5 | 12-20 |
| 2009 | 5x114.3 | 70.5 | 12-20 |
| 2010 | 5x114.3 | 70.5 | 12-20 |
| 2011 | 5x114.3 | 70.5 | 12-20 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1998 Ford Ranger Super Cab
For your 1998 Ford Ranger Super Cab, the bolt pattern is 5x114.3mm with a center bore of 70.5mm. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to prevent vibration and stress on lug studs. The offset range is 12-20mm; staying within this range maintains proper suspension geometry and prevents rubbing. Always use the correct lug nuts: 1/2-20 thread with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Ranger Super Cab appears from 1992 to 2011 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 32.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-105 ft-lbs after 50-100 miles.
- ✅ Avoid wheels with a center bore larger than 70.5mm without hub-centric rings.
- ✅ Check for caliper clearance, especially with 15-inch wheels or larger brakes.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 Ford Ranger Super Cab — Frequently Asked Questions
What is the bolt pattern for a 1998 Ford Ranger Super Cab?
The 1998 Ford Ranger Super Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 12-20mm.
What other years of Ford Ranger Super Cab have the same bolt pattern as the 1998?
The Ford Ranger Super Cab uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1998 Ford?
The 1998 Ranger Super Cab uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 1998 Ford Ranger Super Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 12-20mm, and a center bore of at least 70.5mm (using hub rings if larger).
What is the factory wheel offset for a 1998 Ford Ranger Super Cab?
The OEM offset for the 1998 Ranger Super Cab is typically around 12-20mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 1998 Ford Ranger Super Cab?
Refer to your owner's manual for exact specs, but always tighten the 1/2 20 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset