1992 Ford Ranger Super Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Ford Ranger Super Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 12-20 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1992 Ranger Super Cab — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Ford Ranger Super Cab's 5x114.3 bolt pattern era, which continued through 2011 (20 consecutive years). Wheels from any 1992–2011 Ford Ranger Super Cab are cross-compatible with the 1992 model.
Ford Ranger Super Cab Bolt Pattern by Year
The table below shows how the Ranger Super Cab's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 5x114.3 | 70.5 | 12-20 |
| 1993 | 5x114.3 | 70.5 | 12-20 |
| 1994 | 5x114.3 | 70.5 | 12-20 |
| 1995 | 5x114.3 | 70.5 | 12-20 |
| 1996 | 5x114.3 | 70.5 | 12-20 |
| 1997 | 5x114.3 | 70.5 | 12-20 |
| 1998 | 5x114.3 | 70.5 | 12-20 |
| 1999 | 5x114.3 | 70.5 | 12-20 |
| 2000 | 5x114.3 | 70.5 | 12-20 |
| 2001 | 5x114.3 | 70.5 | 12-20 |
| 2002 | 5x114.3 | 70.5 | 12-20 |
| 2003 | 5x114.3 | 70.5 | 12-20 |
| 2004 | 5x114.3 | 70.5 | 12-20 |
| 2005 | 5x114.3 | 70.5 | 12-20 |
| 2006 | 5x114.3 | 70.5 | 12-20 |
| 2007 | 5x114.3 | 70.5 | 12-20 |
| 2008 | 5x114.3 | 70.5 | 12-20 |
| 2009 | 5x114.3 | 70.5 | 12-20 |
| 2010 | 5x114.3 | 70.5 | 12-20 |
| 2011 | 5x114.3 | 70.5 | 12-20 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1992 Ford Ranger Super Cab
For your 1992 Ford Ranger Super Cab, the bolt pattern is 5x114.3mm with a center bore of 70.5mm. When selecting aftermarket wheels, ensure they have a center bore of at least 70.5mm or use hub-centric rings to prevent vibration and ensure proper load distribution. The recommended offset range is 12-20mm; staying within this range maintains proper suspension geometry and prevents tire rubbing. Always use lug nuts with the correct thread pitch (1/2-20) and seat type (cone or ball seat) to match the wheel. Incorrect lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and avoid wheels with a smaller center bore.
Historical Fitment Data Reference
In our dataset, Ford Ranger Super Cab appears from 1992 to 2011 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 32.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore smaller than 70.5mm; they will not fit without machining.
- ✅ Check for clearance between the wheel spokes and brake calipers, especially with wider wheels.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Ford Ranger Super Cab — Frequently Asked Questions
What is the bolt pattern for a 1992 Ford Ranger Super Cab?
The 1992 Ford Ranger Super Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 12-20mm.
What other years of Ford Ranger Super Cab have the same bolt pattern as the 1992?
The Ford Ranger Super Cab uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What is the PCD for a 1992 Ford Ranger Super Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 Ranger Super Cab, the PCD is 5x114.3.
Will wheels from another Ford fit my 1992 Ranger Super Cab?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.5mm.
How tight should I torque the lug nuts on a 1992 Ford Ranger Super Cab?
Refer to your owner's manual for exact specs, but always tighten the 1/2 20 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 1992 Ford Ranger Super Cabs use lug bolts or lug nuts?
The 1992 Ranger Super Cab requires 1/2 20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset