1994 Ford Ranger Super Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Ford Ranger Super Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 12-20 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 Ranger Super Cab — Year-Specific Fitment Context
The 1994 Ford Ranger Super Cab is in year 3 of 20 using the 5x114.3 pattern (1992–2011). Wheels from any 1992–2011 Ford Ranger Super Cab are cross-compatible with the 1994 model.
Ford Ranger Super Cab Bolt Pattern by Year
The table below shows how the Ranger Super Cab's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 12-20 |
| 1993 | 5x114.3 | 70.5 | 12-20 |
| ▸ 1994 | 5x114.3 | 70.5 | 12-20 |
| 1995 | 5x114.3 | 70.5 | 12-20 |
| 1996 | 5x114.3 | 70.5 | 12-20 |
| 1997 | 5x114.3 | 70.5 | 12-20 |
| 1998 | 5x114.3 | 70.5 | 12-20 |
| 1999 | 5x114.3 | 70.5 | 12-20 |
| 2000 | 5x114.3 | 70.5 | 12-20 |
| 2001 | 5x114.3 | 70.5 | 12-20 |
| 2002 | 5x114.3 | 70.5 | 12-20 |
| 2003 | 5x114.3 | 70.5 | 12-20 |
| 2004 | 5x114.3 | 70.5 | 12-20 |
| 2005 | 5x114.3 | 70.5 | 12-20 |
| 2006 | 5x114.3 | 70.5 | 12-20 |
| 2007 | 5x114.3 | 70.5 | 12-20 |
| 2008 | 5x114.3 | 70.5 | 12-20 |
| 2009 | 5x114.3 | 70.5 | 12-20 |
| 2010 | 5x114.3 | 70.5 | 12-20 |
| 2011 | 5x114.3 | 70.5 | 12-20 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 Ford Ranger Super Cab
For your 1994 Ford Ranger Super Cab, the bolt pattern is 5x114.3 with a critical center bore of 70.5mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load distribution. Offset must stay within 12-20mm; deviating risks rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (1/2-20) and seat type—factory wheels use a cone seat, while aftermarket may require ball or flat seats. Mismatched lug nuts can cause wheel detachment. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Ford Ranger Super Cab appears from 1992 to 2011 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 32.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without verifying center bore; always use hub-centric rings if bore exceeds 70.5mm.
- ✅ Check for clearance between the wheel spokes and brake calipers, especially with offset near 12mm.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Ford Ranger Super Cab — Frequently Asked Questions
What is the bolt pattern for a 1994 Ford Ranger Super Cab?
The 1994 Ford Ranger Super Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 12-20mm.
What other years of Ford Ranger Super Cab have the same bolt pattern as the 1994?
The Ford Ranger Super Cab uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What is the factory wheel offset for a 1994 Ford Ranger Super Cab?
The OEM offset for the 1994 Ranger Super Cab is typically around 12-20mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 12-20mm offset mean for the 1994 Ranger Super Cab?
An offset of 12-20mm means the wheel's mounting surface is 12-20mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
How do I measure the bolt pattern on my 1994 Ford?
The 1994 Ranger Super Cab uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 70.5mm center bore important for the 1994 Ranger Super Cab?
The 70.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset