2014 Ford Taurus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Ford Taurus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Taurus — Year-Specific Fitment Context
The 2014 Ford Taurus is in year 6 of 11 using the 5x114.3 pattern (2009–2019). Wheels from any 2009–2019 Ford Taurus are cross-compatible with the 2014 model. Across its full production run (1992–2019), the Taurus has also used: 5x108.
Ford Taurus Bolt Pattern by Year
The table below shows how the Taurus's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x108 | 63.4 | 42 |
| 1993 | 5x108 | 63.4 | 42 |
| 1994 | 5x108 | 63.4 | 42 |
| 1995 | 5x108 | 63.4 | 42 |
| 1996 | 5x108 | 63.4 | 42 |
| 1997 | 5x108 | 63.4 | 42 |
| 1998 | 5x108 | 63.4 | 42 |
| 1999 | 5x108 | 63.4 | 42 |
| 2000 | 5x108 | 63.4 | 42 |
| 2001 | 5x108 | 63.4 | 42 |
| 2002 | 5x108 | 63.4 | 42 |
| 2003 | 5x108 | 63.4 | 42 |
| 2004 | 5x108 | 63.4 | 42 |
| 2005 | 5x108 | 63.4 | 42 |
| 2006 | 5x108 | 63.4 | 42 |
| 2007 | 5x108 | 63.4 | 42 |
| 2008 | 5x108 | 63.4 | 42 |
| 2009 | 5x114.3 | 63.4 | 50 |
| 2010 | 5x114.3 | 63.4 | 50 |
| 2011 | 5x114.3 | 63.4 | 50 |
| 2012 | 5x114.3 | 63.4 | 50 |
| 2013 | 5x114.3 | 63.4 | 50 |
| ▸ 2014 | 5x114.3 | 63.4 | 50 |
| 2015 | 5x114.3 | 63.4 | 50 |
| 2016 | 5x114.3 | 63.4 | 50 |
| 2017 | 5x114.3 | 63.4 | 50 |
| 2018 | 5x114.3 | 63.4 | 50 |
| 2019 | 5x114.3 | 63.4 | 39 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Ford Taurus
The 2014 Ford Taurus uses a 5x114.3 bolt pattern with a 63.4mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the 63.4mm bore, preventing vibrations. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the 12x1.50 thread pitch requires conical (60-degree) seat lug nuts. Using incorrect seat type (e.g., ball seat) can lead to wheel loosening. For cross-compatibility, wheels from 2009–2019 Taurus models fit directly. Avoid 5x108 pattern wheels from earlier models.
Historical Fitment Data Reference
In our dataset, Ford Taurus appears from 1992 to 2019 (28 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 11.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50 miles of driving.
- ✅ Aftermarket wheels with a larger center bore require hub-centric rings; plastic rings are acceptable for street use.
- ✅ Check inner clearance with aftermarket wheels; offset changes can cause contact with strut or fender.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Ford Taurus — Frequently Asked Questions
What is the bolt pattern for a 2014 Ford Taurus?
The 2014 Ford Taurus uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Taurus have the same bolt pattern as the 2014?
The Ford Taurus uses the 5x114.3 pattern from 2009 through 2019. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the factory wheel offset for a 2014 Ford Taurus?
The OEM offset for the 2014 Taurus is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2014 Ford?
The 2014 Taurus uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2014 Ford Taurus?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What does 50mm offset mean for the 2014 Taurus?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset