2008 Ford Taurus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Ford Taurus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Taurus — Year-Specific Fitment Context
The 2008 model year is the final year of the Ford Taurus's 5x108 bolt pattern run (since 1992). Wheels from any 1992–2008 Ford Taurus are cross-compatible with the 2008 model. Important: starting in 2009, Ford switched to 5x114.3 — those wheels will not fit the 2008 model. Across its full production run (1992–2019), the Taurus has also used: 5x114.3.
Ford Taurus Bolt Pattern by Year
The table below shows how the Taurus's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x108 | 63.4 | 42 |
| 1993 | 5x108 | 63.4 | 42 |
| 1994 | 5x108 | 63.4 | 42 |
| 1995 | 5x108 | 63.4 | 42 |
| 1996 | 5x108 | 63.4 | 42 |
| 1997 | 5x108 | 63.4 | 42 |
| 1998 | 5x108 | 63.4 | 42 |
| 1999 | 5x108 | 63.4 | 42 |
| 2000 | 5x108 | 63.4 | 42 |
| 2001 | 5x108 | 63.4 | 42 |
| 2002 | 5x108 | 63.4 | 42 |
| 2003 | 5x108 | 63.4 | 42 |
| 2004 | 5x108 | 63.4 | 42 |
| 2005 | 5x108 | 63.4 | 42 |
| 2006 | 5x108 | 63.4 | 42 |
| 2007 | 5x108 | 63.4 | 42 |
| ▸ 2008 | 5x108 | 63.4 | 42 |
| 2009 | 5x114.3 | 63.4 | 50 |
| 2010 | 5x114.3 | 63.4 | 50 |
| 2011 | 5x114.3 | 63.4 | 50 |
| 2012 | 5x114.3 | 63.4 | 50 |
| 2013 | 5x114.3 | 63.4 | 50 |
| 2014 | 5x114.3 | 63.4 | 50 |
| 2015 | 5x114.3 | 63.4 | 50 |
| 2016 | 5x114.3 | 63.4 | 50 |
| 2017 | 5x114.3 | 63.4 | 50 |
| 2018 | 5x114.3 | 63.4 | 50 |
| 2019 | 5x114.3 | 63.4 | 39 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2008 Ford Taurus
For your 2008 Ford Taurus, the bolt pattern is 5x108 with a center bore of 63.4mm. When selecting aftermarket wheels, ensure they have a center bore of at least 63.4mm; if larger, use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 42mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Lug nuts are M12x1.5 with a conical (60-degree) seat. Never use ball-seat or shank-style lug nuts, as they can loosen. Always torque to manufacturer specs (100 ft-lbs) and re-torque after 50 miles. Note: 2008 is the last year for 5x108; 2009+ Taurus uses 5x114.3—those wheels will not fit without adapters.
Historical Fitment Data Reference
In our dataset, Ford Taurus appears from 1992 to 2019 (28 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 11.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, verify that the hub bore is at least 63.4mm; use hub-centric rings if larger.
- ✅ Avoid wheels from 2009+ Taurus (5x114.3) without adapters; they will not bolt on directly.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Ford Taurus — Frequently Asked Questions
What is the bolt pattern for a 2008 Ford Taurus?
The 2008 Ford Taurus uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 42mm.
What other years of Ford Taurus have the same bolt pattern as the 2008?
The Ford Taurus uses the 5x108 pattern from 1992 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Will 2009 Ford Taurus wheels fit a 2008 model?
No. The 2009 Ford Taurus switched to a 5x114.3 bolt pattern, which is not compatible with the 2008 model's 5x108. Using mismatched patterns is unsafe.
What does 42mm offset mean for the 2008 Taurus?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
How do I measure the bolt pattern on my 2008 Ford?
The 2008 Taurus uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Ford fit my 2008 Taurus?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset